Topics

1

Hardware, Cabling, Installations / hardware problems for RRC1258?

« on: 2014-12-21, 17:16:46 »

Hello,
suddenly my unit RRC1258, (sn 4377 server) with ip 194.116.59.36, no longer able to communicate with my radio icom 2820.
The other unit (receiver) has ip 194.116.59.37; on the web page "status" there are no errors related to TCP / IP, sip pass ... and more.
I think it's due to a TTL port hardware fault.
When I connect it all together in the speaker of the radio I hear a cyclical noise (TOC TOC) and the display will remain off.
Does anyone have any idea what can I check? Voltages, IC ... something?
I also have an oscilloscope.

Thank you for your help.


Andrea

 

2

Hardware, Cabling, Installations / RRC1258 V6/7

« on: 2012-11-14, 23:44:05 »

Good evening everyone, I posted a message last night, but got lost. I try to rewrite it.
I have a Radio control with hardware version 6.
Can I use it with radio remote control version 7?
While inserting the correct parameters will always appear sip error and, in version 7, I saw that there is a SIP voice out / in on port 5060. How can this be? I do not have the firewall.
Thanks for the replies.

Andrea IW1GAP

3

General discussion forum / RRC-1258 Firmware 2.65 V7

« on: 2012-11-13, 23:33:56 »

Hello,
I find it really strange that:
my device RRC Radio MkII can not communicate with RRC-Control V7.
There is a minimum compatibility between the two terminals?
The error that appears is:
CP-> Panel power on after SIP error
CP-> Panel power off two to no comm.
CP-> Panel power on after SIP error
CP-> Panel power off two to no comm.
CP-> Panel power on after SIP error
CP-> Panel power off two to no comm.
CP-> Panel power on after SIP error
CP-> Panel power off two to no comm.
CP-> Panel power on after SIP error
CP-> Panel power off two to no comm.
CP-> Panel power on after SIP error

the doors, on firewall, are open, the cable for ic2820 is ok (i13a).
Any ideas please?

thanks
Andrea

4

General discussion / RRC-Micro PC and ICOM IC-E2820

« on: 2012-04-07, 00:12:32 »

Hello,
there is the possibility to configure the icom IC-E2820 to work with RRC-Micro?
Happy Easter to everyone.
 
Andrea IW1GAP

5

General discussion / RRC-Micro PC Client do not wotk with HRD 5.11

« on: 2012-03-02, 23:29:28 »

Hello everyone,
My name is Andrea and I purchased Vs. product 1274A.
I using the software Microbit RRC-Client vers. 1.1.2 but unfortunately I can not interface my Yaesu FT857 with HRD version 5.11
I use the scheme published by FT8x7 pg. To 141 pg. Rev. 147, A22 manual, TTL/mini din ... COM0 ...
I can't interface it to the program because voice and microphone work perfectly, I receive and transmit, but unfortunately does not recognize the COM.
I am available to attach the logs ... I have no more ideas and then ask for help.
Can we help me?

Thank you!

Andrea

IW1GAP

6

Hardware, Cabling, Installations / Yaesu FT857 not vork

« on: 2012-02-26, 02:40:29 »

Hello, I am Iw1gap, Andrea and live near Turin.
I'm trying to run the machine YAESU FT 857 with the RRC-1258.
I created all cables described from page 122 to page 125, Rev. A20 manual but nothing works.
I tried the remoterig 1274A, receive and transmit without radio control.
I tried to follow the instructions to interface with HRD, but I can not make it work.
I did downgrade the firmware to the version released in December ... I do not know what to do ...
The settings followed are those marked on p. Manual Rev. 127, A20.
Can anyone, please, help me?

Many thanks.

Andrea
http://server.radio.it