Topics

1

Configuration, RRC 1258 / Codec inp gain issue

« on: 2013-12-05, 02:37:49 »

I am operating a pair of 1258 MKII units Version 5 with firmware 2.75

Company   Microbit
Product   1258
PID   4
Version   5
HW   6
Software   2.75
Bootloader   1.8
Compiler   4.6.2
Build   Oct 31 2013 16:36:10
ROM/RAM   450472/41872
ETH-RAM   2944 (max 3kB)
USB-RAM   15312 (max 16kB)
ResetSrc   0 [3]
Uptime   1 Days, 3 Hours, 24 Mins, 37 Secs
Serial number   3506

I am operating a Yaesu FT-100d with the head at the "control" end.

I am having a problem with the Codec Inp Gain of the radio unit.

The units are running on a transparent Wi-Fi link, so both are setup on the same LAN as 192.168.0.XXX

On the web page setup for the radio unit, I can decrease Codec Inp Gain, "submit", and "apply changes".  The unit re-starts and the audio from the radio is decreased appropriately.

However, if I wish to increase Codec Inp Gain, I click "submit", and "apply changes".  The unit re-starts, however, the audio levels are not changed.

I find that if I go to the remote site and remove and then restore power to the unit then the Codec Inp Gain increase will actually take effect.

This seems like a firmware issue to me.  I wonder if anyone can replicate this ?

Thanks, Steve-dog, k5dog

2

Hardware, Cabling, Installations / FT-100 hardware mods?

« on: 2013-01-04, 00:16:19 »

From an old post:

Yes RRC1258MkII ver 7 can be used to remote the FT-100, but I have not had time to update the manual yet. It may take some time as Im on vacation now.


73 de mike

I have an RRC1258MkII Ver 5.  Can I use that with the FT-100 if I do the FT-857 hardware mods?

Tnx,
Steve-dog, k5dog