Show Posts
1
Configuration, RRC 1258 / Sometimes lost connection between TS-2000 and RC-2000
« on: 2011-11-22, 21:41:46 »
Hi, sometimes I lost connection between TS-2000 and RC-2000
Or better say that info transfer is only from TS-2000 to RC-2000 direction.
As example:
I can swich on my radio over network, all working, and in one moment I can only receive audio and see moving S-meter and freq if scanning. From remote side to radio side nothing working.
No audio level, no squelsh, no poweroff. Only what I can do is switch off RRC in remote side and after restart all working again (from some min to several hours).
And in this time Remote side thinking that radio is off:
I think (but not sure), that with 57600 speed is easy to lost some bits when connections is over UDP.
Dont remember similar situation when working/testing in my home with local network.
Any ideas what I can do with this problem?
Or better say that info transfer is only from TS-2000 to RC-2000 direction.
As example:
I can swich on my radio over network, all working, and in one moment I can only receive audio and see moving S-meter and freq if scanning. From remote side to radio side nothing working.
No audio level, no squelsh, no poweroff. Only what I can do is switch off RRC in remote side and after restart all working again (from some min to several hours).
And in this time Remote side thinking that radio is off:
Quote
Control panel ON
Radio OFF
Connection status OK
SIP status Connected/transfering
Last SIP error None
RTP status Excellent(60)
UDP cmd status OK(45)
SIP command timeout 0
I think (but not sure), that with 57600 speed is easy to lost some bits when connections is over UDP.
Dont remember similar situation when working/testing in my home with local network.
Any ideas what I can do with this problem?
Quote
Product 1258
Hardware 4
Software 2.46
Bootloader <= 1.7