Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - LA7NO

Pages: [1]
1
Hei,

Vet noen om der finnes ferdig laget kabel for kopling mellom RRC-1258 MkII og lydkortet?
Lydkortet har vanlige 3mm stereo jack kontakter.

Altså, en plugg til AUX/MIC pinne 3 (signal) og 4 (jord), samt en til SP.
Det er den som går til AUX/MIC (RJ45) som er problemet.
Den andre er standard stereo kabel.

Klarer ikke å lage dette selv, grunnet artrose i fingrene.

73,

Per-Tore / LA7NO

2
General discussion forum / Cant browse to remote radio
« on: 2018-12-18, 01:20:05 »
Hi,

I am in Germany and the radio is in Norway.
I am using Windows 10 and Firefox.

I can use the radio in the usual fashion via the the two Remoterig units.
Everything works the way it should.

Now I need to reconfigure some settings on the radio side. So I try to connect to its Remoterig unit via the browser using the address given in control unit menu at "Sip contact(Radio RRC IP/hostname)", but get no response. However, both ping and tracert to this address gives the expected result.

What can the reason be that I am not able to get to the webpage of the Remoterig unit?

Best 73,

Per-Tore
DL/LA7NO



3
Hardware, Cabling, Installations / K3 remote
« on: 2017-02-27, 10:26:03 »
Hello,

The last few days we have been working on setting up K3 + Remoterig + K3/0-mini to communicate over Internet using wirelss 4G routers. All seems to work just fine on receive and CW transmit.
However, we have not managed to get it to work using the mic.

I have been using an old Kenwood dynamic mic.
The K3 is configured with mic set to "rP.L" (no bias)
The K3/0 is set to "FP.H" (also no bias).

Also tried with a Heil headset.
Tried this with K3 set to both "rP.H bIAS" and "rP.H" (no bias)
Also tried with K3/0 set to "FP.H bIAS".

Nothing worked, even with mic gain set to max.
Now I start to wonder if there can be something wrong with the Remoterig configuration.

Hope someone can help.

Regards,

Per-Tore
LA7NO

4
General discussion forum / Microbit Setup App
« on: 2017-02-21, 20:10:39 »
I am trying the Microbit Setup App v1.0.1 for iPhone.

It works relatively OK on my old iPhone4.

However, on the iPhoneSE it has a problem with the display size.
The result from a search is hidden behind the text on the top on the screen. If the screen is being moved a bit down by using the finger, one can see the result. When the finger is being removed, the screen moves again up, and the text again disappears.

This seems to be a problem with the automatic adjustment to screen size.



5
General discussion forum / K3 volume setting
« on: 2017-02-20, 19:56:33 »
Using the standard cables, the K3 audio is being transferred to the RRC-Radio from the K3 SPKRS connector.
I wonder why the LINE-OUT is not used instead?

The K3 AF adjustment will change the level being sent to the RRC.
There is apparently no mention about the AF setting on the K3.

Am I missing something?

73,

Per-Tore
LA7NO

6
Hello,

I  need info on how to use a K3 + 1K-FA remotely through Remoterig and K3/0-mini.
I did not find any relevant info on this in the K3-Remote manual etc.

Today the K3-ACC is occupied with the 1K-FA CAT cable.

Best 73,

Per-Tore
LA7NO

7
Hardware, Cabling, Installations / USB driver
« on: 2016-01-15, 11:04:56 »
Hello,

I am not able to get the USB connection to my 1216H working.
It seems that there is a USB driver problem.
The Setup Manager does not see the switch.

I am running Windows XP Pro SP3 fully updated.

Regards,

Per-Tore
LA7NO

8
Configuration, RRC 1258 / Pulse settings
« on: 2015-10-31, 14:32:31 »
I can not find the explanation for the "pulse settings" referred to in 'Set Relays' menu.
Please refer to the screen shot.

P-T


9
General discussion forum / IC-7100 problem
« on: 2015-10-21, 20:19:52 »
Hello list,

I have had my setup working nicely for a couple of days now. It is a standard configuration with IC-7100 radio on one RRC and the control unit on another RRC. The Radio-RRC is connnected to the router with Ethernet cable. The Control-RRC is connected to a 4G GSM mobile router (ice.net Smartrouter). I am using DynDNS and DHCP as described, and the router is setup with port-forwarding. So, the connection will be really remote, and not on the same local segment.

All works very well. However if I turn off power on the Control-RRC without first powering off the IC-7100 via the control panel, then things go wrong. Afer powering-up the Control-RRC again, nothing seems to works. It seems that the only solution is to reset the IC-7100 radio unit by powering it off and on.

Any clues anyone?

Regards,

Per-Tore
LA7NO





Pages: [1]