Topics

1

Configuration, RRC 1258 / 7100 Data Modes

« on: 2016-03-21, 20:28:23 »

Hi,
Is there a way to transmit using JT65-HF on the IC7100. I can obviously receive via the audio out jack on the head end but the data connectors are on the radio side. I have remote CAT control set up so can probably get PTT to work but short of messing with the mic connector I can't see a way to get audio in.

Bob

2

Configuration, RRC 1258 / CAT control

« on: 2016-01-04, 09:39:35 »

HI,
I want to run CAT commands over the RRC to my IC-7100. Am I correct in thinking I connect the base unit USB connection to the radio RRC and the control RRC USB connection to the computer. I guess there is some configuration to do also.

Thanks
Bob

3

Configuration, RRC 1258 / IC-7100 will not power up correctly

« on: 2015-12-12, 21:05:42 »

Hi,
Just trying to configure for my IC-7100. As far as I can tell everything is correct:
 IP configured for local testing, both plugged into same switch.
 Installed the required PCB on the Controller RRC as I have a later version 7100.
 Correct links installed on the Radio RRC.

When I press the power button the back light on the mic keypad comes on, I hear a couple of clicks and the yellow leds on both ends come on for about 2s then go off and the backlight goes out. The display never shows anything.

On the web interface the SIP status is 'Unknown 1' which I understand is a timeout from other posts.

I've no idea what's going on and after several hours of trying have got nowhere. Any help appreciated.

Bob