Topics

1

General discussion forum / 1258 powers down when volume level is increased on IC-7100

« on: 2016-12-20, 19:19:18 »

I have a pair of 1258 configured to work with the IC-7100.  They are local to my internal LAN and seem to be working as they should with one exception.  When I advance the volume on the control head the unit (Remote Rig Control end) powers down.  If I keep the volume down to a bare minimum all seems to work.  I am using the level converter/strapping header on the control end unit.  I verified all the strapping.  When the IC-7100 is connected via hardwire, I can turn up the volume to maximum without problem.
I have replaced the power supplies to no avail.  Additionally I replaced the short CAT.6 cable I use between the RR Control unit and the control head.  Can anyone help?

pdh/WB9CAR

2

General discussion forum / WEP Security NOT working

« on: 2016-02-27, 17:55:54 »

WEP security is not working on my Remote Rig 1258 units.  I worked with Steve at HRO and we discovered the following:
The unit is working fine using WPA-PSK or WPA2-PSK.  It is the latest hardware revision and running Ver: 2.87 microcode.  It is failing using WEP (either 64 or 128 bit).

The AP models tested were as follows:

Westel, Model: A90-327W-15-06
Rev: E, Serial Number:  04Z410240698

Hiro, Model: H50212
Serial Number:  1315000198

Hiro, Model Number: H50188
Serial Number:  1217004209

TP-LINK Model:  WA5210G
S/N:  Unkn

In all cases the unit failed when using WEP security.  Both 64 bit and 128 bet were tried with a passkey of 12345 for the WEP-64 and 1a2b3c4d5e6f7 for the WEP-128.

Is there a fix for such?

Pat
WB9CAR