Topics

1

General discussion / RC1216H - or other control box

« on: 2014-08-06, 00:40:32 »

Hi to all,

Wondering if anyone has interfaced the RC1216H, that interfaces with the Acom and Expert amps, to the Ameritron ALS-1300 solid state amp?

If so, any info would be appreciated.

73,
Ed
K6HP

2

Configuration, RRC 1258 / PTT stalls UDP

« on: 2014-05-05, 23:26:46 »

I changed from a Verizon 3g modem in my RV and had to upgrade to a 4G modem. I also changed the router in the RV to a Cradlepoint (I forget model). I had been unable to get the two to talk to each other either thru my dyndns route or thru the remoterig dyndns. I did finally resolve the connection by getting the IP assigned to the modem (which does not match the public IP found by doing a google search for "My IP").

Once I got the IP off the modem and plugged that into the control box the radio was talking to the control box and the control head (TS-480HX) was receiving fine.

However, as soon as I key the mic the unit stops receiving (on un-key) and appears to be frozen. Then several seconds later it turns off.

I'm assuming this is a configuration within the radio or control head Remote Rig boxes. But I have gone thru everything and can't find anything that appears a configuration error. I have also set the Control Head box as DMZ in addition to port forwarding. Nothing seems to work.

The error message on the radio "status" is UDP audio stalled". The status on the Control box indicates no errors and it is disconnected.

Any ideas?

Thanks,
Ed
K6HP

3

General discussion forum / DYNDNS

« on: 2014-03-19, 01:41:25 »

I recently upgraded to the latest firmware. Now, while trying to use my DYNDNS account for the IP between the two units, it will only accept the ddns.remoterig.com as the dynamic DNS server.

I've used the DYNDNS account for several years with no issue but now I'm forced to use the remote rig DNS. Does anyone know of a fix for this or is there a bug which will be fixed in the next firmware?

I would think that to keep the load on the remote rig DNS server lower having the option of using remote rig dns or DYNDNS would be allowed.

73,
Ed
K6HP

4

General discussion forum / Reset Login on RRC-1258

« on: 2010-09-09, 22:21:39 »

Can anyone tell me how to reset the login name and password for the RRC-1258?

I tried a reset and also re-loaded the firmware but the request for a password still comes up.

I can't find anything in the manual that removes the login and I can't get into the unit thru the USB port to reset it.

Thanks es 73,
Ed
K6HP