Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - SM0SHG

Pages: [1]
1
iPhone App / Problem med appen i iOS8?
« on: 2014-10-26, 10:01:00 »
Hej,

Har just installerat appen på min iPhone (som jag kör iOS8.1 på). Jag kan inte läsa av relästatus, eller ställa reläerna heller för den delen. Hela reläsidan är tom bortsett från texten Relays och Reload. Klickar jag på Reload händer ingenting.

Läsa temperatur går dock bra.

Någon känt problem?

Mvh

Adde


2
Hardware, Cabling, Installations / K3/0 with built-in RRC?
« on: 2013-08-17, 11:20:27 »
Has anyone put the RRC box inside the K3/0? The K3/0 certainly as the space for it... Any ideas, toughts, experience to share?
73's de Adde, SM0SHG

3
Configuration, RRC 1258 / New in 2.38... "Elecraft advanced"
« on: 2012-06-01, 15:09:46 »
Hello,

Under the "Advanced settings" menu there are now a setting called Elecraft advanced"... Can't find any ref. in the manual for this one. What is it for?

Regards,

Adde

4
General discussion forum / K3/0 -> K3/100 Known bugs?
« on: 2012-06-01, 11:54:46 »
Hi all,

I have now set up my K3/0 and K3/100 with the Remoterig K3 Twin units. Everything seems to work great. Does anyone know about bugs in the system? I'm thinking of bugs in the Elecraft FW...

Mitch, you are a power user... Have you noticed any bugs?

73 de Adde

5
General discussion forum / Elecraft K3 Twin and RRC Micro?
« on: 2012-05-28, 22:05:33 »
I have the Electraft K3 Twin products and about the set them up.

When I'm "on the road" I want to use the RRC Micro with HRD to control my K3 on the remote site. Will it "just work" or do I need to change anything in the set-up?

73 de Adde, SM0SHG

6
General discussion forum / N1MM Voice keyer with Remoterig?
« on: 2011-12-12, 22:28:34 »
I would like to use N1MM's voice keyer with my TS-480. To control the radio with N1MM is no problem... But how do I get the radio to "play" the WAV files? Do I just connect the computer audio-out in paralell with the mic input on the local RRC? Or is there any smarter way to do it?
Regards,
Adde

7
Hardware, Cabling, Installations / Cable-set for IC-706MK2G
« on: 2011-12-09, 18:22:53 »
Hello,

Does anyone now if there is a "ready to go Remoterig cable-set" for the IC-706MK2G? Looking especially for the "control head separation cable"... The one with the ICOM proprietary connector... Yes, yes, I know, it's easy to cut and solder... Well, I don't want to solder. I want to buy... :)

Regards,

Adde

8
Configuration, RRC 1258 / RRC-1258 with RRC-1258mkII
« on: 2011-11-04, 21:26:23 »
Hello,

Is it possible to "mix" old RRC's with new ones?

On radio side: A IC-706 with RRC-1258mkII

On control side: IC-706 head with RRC.1258 (ver 1)

Regards,

Adde

9
Hi All,

Is it possible to use the display from a IC-703 with a IC-706MKIIG radio in the Remoterig concept?

Regards,

Adde, SMØSHG

10
General discussion / RRC-Micro with HRD and FT-897
« on: 2011-09-22, 23:09:40 »
Hello,

Trying to get the combination RRC-Micro, HRD and FT-897 to work.

I have audio and I can transmit using the PTT button on the RRC-Micro "dongle". No problem. But I can't reach the FT-897 with HRD. Please see the attached pictures for my settings.
I'm using the CT-62 cable between FT-897 and COM2 on the RRC-1258 box. The FT-897 is "tuned" to 9600bps under menu 19, and meny 20 says "CAT".

What am I doing wrong?

Best Regards,

Adde



11
General discussion forum / Power-up issue with TM-D710
« on: 2011-09-04, 09:33:00 »
Hi all,

I'm using the RRC's to operate a TM-D710. It works great. But every now and then, the display wont power-up properly when I push the "on" button. I get the "roger beep", but the display stays dark and no info is visible. The quick fix is to reset the local RRC box by killing the power. Then it works great again for a few times. This might happen every fourth or fifth time I try to turn it on.

I'm using the latest FW...

Any suggestions what I could do?

Regards,
Adde

12
Hej,

Jag har en TS-480 som jag tänkte styra med RRC Micro och HRD.

På TS-480 finns det både en CAT kontakt och en RS232 kontakt. Vilken av dessa skall jag använda?

Mvh
Adde

13
Hej,
Någon som vet om Yaesus lilla HF rigg, FT-100D, går att köra med Remoterig i delat montage? Hittar ingen info om detta på www.remoterig.com.
73 de Adde, SM0SHG

14
Allmänt diskussionsforum / Ingen PTT funktion i TM-D710
« on: 2011-05-06, 19:35:16 »
Hej,
Har just kopplat ihop mina RCC för att köra med en TM-D710. Det fungerar halvvägs... Vanlig mottagning fungerar bra men det blir problem vid sändning. PTT'n "drar inte", radion vill alltså inte hamna i TX läge. Skicka 1750Hz med funktionstangent PF2 går dock bra.
Vidare verkar den inte avkoda APRS paket heller av någon anledning.
Några förslag vad jag kan testa?
Mvh Adde, SM0SHG

Pages: [1]