1
General discussion / RRC PC Client Runs with XP-64bit?
« on: 2011-09-15, 01:47:29 »
Is software compatible? I get this error, in attachment.
Regards,
Tedd K6OI
Regards,
Tedd K6OI
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
General discussion forum / iPhone 4 as Wifi hotspot to access RemoteRig
« on: 2011-08-14, 06:54:11 »
I thought this would work but doesn't. I wanted to use RemoteRig wirelessly by creating a wifi hotspot with my iphone 4 and pairing it with a Netgear WNCE2001 wifi adapter hooked up to RemoteRig. The problem is that the Netgear adapter does not see the iPhone wifi hotspot. It sees my home wifi and all the ones in the neighborhood. Any ideas?
73 Tedd K6OI
73 Tedd K6OI
3
General discussion forum / Kenwood TM-D700 Works Great with RemoteRig
« on: 2011-08-13, 17:47:34 »
I've heard of people making this radio work with RemoteRig but not much in terms of wiring and configuration. I got it working by using settings and hardware and wiring configurations as a combination of a D710 and a TS-2000.
On the control side, the D700 mic works as-is. Note that it works just as a mic. No up - down or VFO switching or memory control or other functions. Just plug into RRC-control Aux/mic input. The D700 control head plugs into the RRC-control TTL port with the normal 6p4c (4/6pol) to 4p4c (4/4pol) cable supplied by Kenwood used to separate the D700 control head from the main radio unit. Strap the Aux/mic and jumper as a D710 on the RRC-control. Attach a speaker. Set the "radio settings" menu as a TS-2000.
On the radio side, use an RJ-45 straight through cable from the Aux/mic port on the RRC-radio to the main unit mic input. The black one supplied by Microbit works fine. Use a straight 6p4c to 6p4c cable from RRC-radio TTL port to main unit control head input. You can buy or make one. Strap the Aux/mic and jumper as a D710 on the RRC-radio. Connect from radio speaker output to RRC-radio speaker input ("sp") with normal 3.5 mm stereo plugs. Set the "radio settings" menu as a TS-2000.
I think I got it all. Now I can check into my public service weekly net while on vacation this week.
73 Tedd K6OI
On the control side, the D700 mic works as-is. Note that it works just as a mic. No up - down or VFO switching or memory control or other functions. Just plug into RRC-control Aux/mic input. The D700 control head plugs into the RRC-control TTL port with the normal 6p4c (4/6pol) to 4p4c (4/4pol) cable supplied by Kenwood used to separate the D700 control head from the main radio unit. Strap the Aux/mic and jumper as a D710 on the RRC-control. Attach a speaker. Set the "radio settings" menu as a TS-2000.
On the radio side, use an RJ-45 straight through cable from the Aux/mic port on the RRC-radio to the main unit mic input. The black one supplied by Microbit works fine. Use a straight 6p4c to 6p4c cable from RRC-radio TTL port to main unit control head input. You can buy or make one. Strap the Aux/mic and jumper as a D710 on the RRC-radio. Connect from radio speaker output to RRC-radio speaker input ("sp") with normal 3.5 mm stereo plugs. Set the "radio settings" menu as a TS-2000.
I think I got it all. Now I can check into my public service weekly net while on vacation this week.
73 Tedd K6OI
Pages: [1]