Messages

1

General discussion forum / Re: IC-7100 REMOTERIG REPEATER

« on: 2016-06-26, 03:49:38 »

Yes i tried that....I think it's a transmission line problem. The radio will output 50 watts in the antenna and the guy on the repeater can hear me. But i never hear the repeater.... i can hear my friend where the remoterig is located. 70cm i hear good on 2m his signal is weak, replace antenna with dummy load and i can hear the local guy just fine.


Thanks
Jim AG4UJ

2

General discussion forum / Re: IC-7100 REMOTERIG REPEATER

« on: 2016-06-26, 01:24:21 »

Is that a menu setting?

3

General discussion forum / Re: IC-7100 REMOTERIG REPEATER

« on: 2016-06-26, 00:34:05 »

Repeater tone is on.

4

General discussion forum / IC-7100 REMOTERIG REPEATER

« on: 2016-06-25, 03:08:33 »

Hello,
          I have the remoterig and IC-7100 working great. I can talk to a friend on the remote end on simplex give find... I can get into a repeater on the remote end fine. But i can not hear the repeater at all. My friend says he hears me on the repeater fine but i can't hear him over the repeater. Has anyone had this issue?

Thanks

Jim AG4UJ

5

General discussion forum / Re: IC-7100 Locks Up

« on: 2016-06-18, 01:15:10 »

Well i have tried 4 other antennas and i still get the same results radio now shut off.....Just like RFI.

6

General discussion forum / IC-7100 Locks Up

« on: 2016-06-15, 22:23:20 »

I have a ic-7100 and RRC-1258MKii working fine. Today i tuned to 7.251 USB to check into Southcars when i pressed the PTT on the mic the red TX light on the 7100 turn red. The AUX/MIC on the front of the RRC light on the left of the connector on (red). The system locked up for about 2 mins, then the ic-7100 reboots. Has anyone seen this before.

Jim AG4UJ

7

Hardware, Cabling, Installations / Re: IC-7100+SIGNALINK+RRC-1258=HELP

« on: 2016-06-05, 23:07:58 »

Ok Thanks for the help i will try that...

Jim AG4UJ

8

Hardware, Cabling, Installations / Re: IC-7100+SIGNALINK+RRC-1258=HELP

« on: 2016-06-05, 22:28:14 »

Mitch what type of cable would i use just a plane cat 5 cable?

Jim AG4UJ

9

Hardware, Cabling, Installations / Re: IC-7100+SIGNALINK+RRC-1258=HELP

« on: 2016-06-05, 21:16:16 »

Mitch the cable i have is a 6 pin din that plugs into the main body of the radio. Are you saying plug the signalink into the i/o port on the RRC? What cable do i need for that. This is all new to me so please bear with me. The RRC-1258 works great it is a joy to use.

Jim AG4UJ

10

Hardware, Cabling, Installations / IC-7100+SIGNALINK+RRC-1258=HELP

« on: 2016-06-05, 03:22:27 »

Hello name here is Jim.  I have my IC-7100 and RRC-1258 working no problems. Next i want to add a Signalink USB box to the system by connecting it to the remote head via the mic port. So i guess my problem is i need a pinout for a cable.  Has anyone tried this before?

Thanks in advance.

Jim AG4UJ