1
Configuration, Webswitch 1216H / Webswitch purring.
« on: 2023-02-05, 08:28:48 »
Webswitch 1216H strong purring interference to both 80 m and 160 m bands. What should be done?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Configuration, Webswitch 1216H / 1216 Rotator Control not responding
« on: 2023-02-02, 16:33:42 »"The page is inaccessible
It took the host xxxxxxxx.ddns.webswitch.se too long to respond"
Contact with the antenna rotator is often lost. All other remote connections will work, but the connection to Webswitch will be lost.
What's wrong?
3
Hardware, Cabling, Installations / Re: AS-1289 broken?
« on: 2022-08-05, 09:55:35 »
Ok, thanks for the reply. I guess I just found it. One UHF body connector of the device was loose. I tightened it and now it seems to stay on.
4
Hardware, Cabling, Installations / AS-1289 broken?
« on: 2022-08-05, 09:28:21 »
Is the antenna switch AS-1289 broken when it suddenly raises the swr high and the linear amplifier goes into swr protection? If I bypass the shifter, this doesn't happen.
5
General discussion forum / Re: Is the DDNS down?
« on: 2022-07-17, 12:10:27 »
Everything works now, great!
6
General discussion forum / Re: Is the DDNS down?
« on: 2022-07-17, 09:54:00 »
The name services antenna rotator remotely still does not work. IP addressing works.
7
General discussion forum / Re: Is the DDNS down?
« on: 2022-07-15, 07:28:50 »
Hello, could someone from the company tell me where to go? Has this DDNS service been discontinued?
8
General discussion forum / VHF-UHF Antenna Switching
« on: 2018-11-28, 13:24:27 »
Hi, is the antenna switch coming to higher frequencies?
I would need a 2m and 70cm remote antenna switch.
I would need a 2m and 70cm remote antenna switch.
9
Hardware, Cabling, Installations / IC-7100 and Signalink USB
« on: 2017-03-12, 19:09:05 »
Hey!
How I could get to work remotely IC-7100 and Signalink USB? Would anyone give some advice? The computer has only a USB interface.
How I could get to work remotely IC-7100 and Signalink USB? Would anyone give some advice? The computer has only a USB interface.
10
Configuration of Routers, Firewalls, etc / Re: WiFi Expand and RRC-1258 MKII
« on: 2016-10-31, 14:52:28 »
The fault was found! When you close the TP-Link repeater, the radio will start immediately. I need to study the repeater settings yet.
Thanks for the advice!
Thanks for the advice!
11
Configuration of Routers, Firewalls, etc / Re: WiFi Expand and RRC-1258 MKII
« on: 2016-10-31, 08:12:28 »
Thank you for your information, but have done this and it has not helped the matter.
I can not get the browser to catch the Control RRC jar. Only a USB cable Setup Manager I get the settings to change. I'm trying to change the home-bar ceiling, but it can not keep up, but the device will always switch to the Default profile.
I can not get the browser to catch the Control RRC jar. Only a USB cable Setup Manager I get the settings to change. I'm trying to change the home-bar ceiling, but it can not keep up, but the device will always switch to the Default profile.
12
Configuration of Routers, Firewalls, etc / WiFi Expand and RRC-1258 MKII
« on: 2016-10-30, 13:42:57 »
I have had a bad Wi-Fi connection on the ground floor, so the acquisition of TP-Link TL-WA860RE Network WiFi Expander. But the RRC-1258 MKII WLAN does not work with this device, why? Browser do I get to catch the Control RRC, but the radio (IC-7100) does not start.
13
General discussion forum / Re: Webswitch 1216 and Yeasu G-450C
« on: 2016-09-27, 12:43:27 »
Thanks Mike! I also found the schematics with Google.
73 Calle
73 Calle
14
General discussion forum / Webswitch 1216 and Yeasu G-450C
« on: 2016-09-27, 12:00:14 »
Can Webswitch 1216H get to work with the Yaesu G-450C?
Pages: [1]