Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - VK2DAG

Pages: [1]
1
General discussion forum / Re: RTL-SDR V3
« on: 2019-04-20, 07:27:44 »
Get VirtualHere.  https://www.virtualhere.com/  It's what I use for a SDR RTL, SDR Softrock and rotator control.

Matt.

2
General discussion forum / OTG PTT input for Android App
« on: 2019-03-02, 03:36:53 »
Is there a way to external switch the PTT in the android app with an On The Go cable?

Thanks.

3
When I went down the remote rig path I decided I needed a TS-480.  I found a used HTX which has no tuner but the sale came with the AT200Pro, which is the 200 watt model.  Neat fix.  I normally hang resonate antennas for each band and haven't really need a tuner.  Now that my "rig" is over 350 km away it's nice to have the tuner until I get my antennas sorted out.

It has worked without a hitch.  As Lou said I press the PF button and it tunes in a few seconds.  Good kit.

Matt  -VK2DAG-

4
Configuration, RRC 1258 / Re: Help understanding I/O
« on: 2019-01-14, 10:35:11 »
Mmm nobody!  :'(

5
Configuration, RRC 1258 / Help understanding I/O
« on: 2018-12-11, 09:30:40 »
Hi Guys.

I'd like a clear understanding on the use of the I/O settings please?

My goal is control 3 remote relays with 3 local switches,  Is this possible?  How do I wire them?  Does IN0 = OUT0, IN1 = OUT1 etc?  Do I use I/O or connect?

Or can I only control 2 remote relays with switches, and one remote relay with ON/OFF web page?

Thanks.

Matt  -VK2DAG-

6
Hardware, Cabling, Installations / Re: USB rotator interface
« on: 2018-10-30, 06:16:36 »
Try a small computer like a Raspberry Pi at the remote site and install "VirtualHere" https://www.virtualhere.com/

Very easy to set up.  It will make available any remote USB device as if it is plugged in to your local PC.

Matt -VK2DAG-

Pages: [1]