Messages

1

General discussion / FT-817 vs. TTL Cable

« on: 2011-05-05, 23:33:08 »

Hi!

I have been using the Yaesu CT-62 Cable until now without problems.
When trying a home made cable between RRC-1258 TTL port and FT-817, HRD can not find the connection. SIP is working.
What to check?
Is COM0 the port to use?

73
Jens/OZ8SO

2

General discussion forum / SIP ALG activated

« on: 2011-02-04, 21:38:10 »

Hello all...

My ISP has enabled the SIP ALG function and will not disable it (He uses it for controlling VoiP access) I have not access to my router as it is password protected.
My setup works fine, but no audio!
Is there a way around this?

73
Jens/OZ8SO

3

Konfiguration av RRC 1258 / Radio RRC High Z SP input

« on: 2010-11-24, 22:30:27 »

Hello all

Is it possible to change the radio RRC SP input to accept the 300mV pp 10 kOhm signal from the fixed audio level output from the FT-817?

/Jens

4

Allmänt diskussionsforum / FT-817 & RRC Client + HRD

« on: 2010-11-08, 22:49:45 »

Hello helpers...

I have problems connecting HRD via RRC client to FT-817.

HRD can not find the COM port

The client program is in contact with RRC
FT-817 is connected to RRC COM2 with CT-62 cable

Mode 3 "FT-8x7" can not be selected in the client program?

In RRC - Do I need to select COM2 in parallel with COM0? or when is this option used?

Any suggestions to stopbit and terminator?

Or what have I completely missed???

73
Jens/OZ8SO