Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - M1EMB

Pages: 1 2 [3]
31
General discussion forum / Re: Choppy Audio from RR
« on: 2013-04-24, 20:34:39 »
Sorry to be a bother but is there anyone that might be able to help me with my issue, just spent the last three hours tearing my hair out trying to find some sort of solution but the audio just breaks up and its so hard to hear people, my audio is fine but rx is really hard work, such a shame as this has worked flawlessy for the last five months :(

32
General discussion forum / Re: Choppy Audio from RR
« on: 2013-04-24, 19:06:48 »
Hi again, thanks for the message, I have been told I might have a high latency,  could someone please take a look at this for me and see what they think, would this be the problem, adjusted the jitter but couldn't see it make much of a difference.   Thank you 

1    <1 ms    <1 ms    <1 ms  192.168.1.1
  2     8 ms     6 ms     5 ms  L100.TAMPFL-VFTTP-92.verizon-gni.net [71.122.77.
1]
  3    14 ms    11 ms    10 ms  G0-13-3-3.TAMPFL-LCR-22.verizon-gni.net [130.81.
105.198]
  4    25 ms     8 ms     9 ms  so-2-0-0-0.TPA01-BB-RTR2.verizon-gni.net [130.81
.28.214]
  5    18 ms    16 ms    15 ms  0.xe-8-0-0.BR1.MIA19.ALTER.NET [152.63.85.162]
  6    18 ms    17 ms    19 ms  204.255.168.238
  7    18 ms    18 ms    16 ms  ge-0-0-0.mpr1.mia1.us.above.net [64.125.30.189]

  8    43 ms    42 ms    42 ms  xe-4-3-0.cr1.dca2.us.above.net [64.125.30.198]
  9   114 ms   113 ms   117 ms  ge-2-0-0.mpr1.lhr2.uk.above.net [64.125.26.22]
 10   115 ms   117 ms   117 ms  xe-8-0-0.mpr1.lhr1.uk.above.net.24.125.64.in-add
r.arpa [64.125.24.222]
 11   120 ms   119 ms   131 ms  u145.above.net [213.161.65.150]
 12     *      126 ms   139 ms  nrth-bb-1c-et-400-0.network.virginmedia.net [62.
253.174.226]
 13     *      136 ms   135 ms  lutn-core-2b-ae0-0.network.virginmedia.net [62.2
53.174.6]
 14   131 ms   135 ms   128 ms  stev-cmts-06-gigaether-141.network.virginmedia.n
et [80.4.221.150]
 15   144 ms   141 ms   143 ms  .cable.virginmedia.com

Trace complete.

33
General discussion forum / Choppy Audio from RR
« on: 2013-04-23, 18:07:26 »
Hello All

Hope someone can please give me a little advice,  over the last week or two I have noticed choppy audio coming from my remoterig, the best way to describe it is on a clear frequency its like the noise level is breaking in and out of the squelch even though the squelch is turned off.   When I talk to people it makes there audio choppy too.   Is this a setting I need to adjust, the connection is good on both units and the internet connection is 50/15meg on one side and 100/10 on the other.   Tried reboots on both ends but still no change.

Hope someone can please help, thank you.

Stu 

34
Hi All

Has anyone had a problem with there 706mk2g like the attached image?  Suddenly today I get garbled display because I noticed it won't transmit on full power on 10mtrs now.   If I knock it back to power setting 6 then it transmits but otherwise it won't.    Any ideas?   Does the SWR automaticly knock off TX if its high?

Thanks

Stu

35
Thank you Mike, ok plugged it in as you suggested, changed IP on PC, changed IP on RR and job done, tested and working great, thank you very much.
Still no USB...but I can live with that.

Stuart


36
Thanks Mike, with 12v applied to them and the usb cable connected I have tried it on 4 PC's 3 with windows 7 and 1 XP, when I plug either unit in I don't get anything at all from the PC, no connection on the Manager and the PC doesn't make the normal USB ding dong noise when I plug something in, its like they are invisible.   Ethernet light connects fine when I plug it into a router np, tried plugging the ethernet into the laptop direct to see if it gets an IP and it does but its not a local IP that I can use a WEB Interface to connect to, its got some 169 IP address which I can ping but not connect too.

37
Anyone help please?  Inching to test these out!

Thank you

38
Hi All

Hit a roadblock on my new 1258's that arrived yesterday, going through the manual step by step and done the straps and jumpers but I am stuck at the Microbit manager setup stage,  first I tried to install the software and it would only load if I said install program only as the virtual com ports version kept throwing up a driver install issue which I tried to instal but it kept going in loops and the message kept appearing and wouldn't let me finish the install, so I choose program only.

Now I plug the units in via USB and the computer (Win7) isn't seeing any attachements via USB...nothing at all.   The software just says Unknown Discconnected and it doesn't change.  Same for both units.  Tried two PC's too inc a laptop.

Can someone please help me here and tell me what I am doing wrong so far?

Thank you

Stuart

39
Hardware, Cabling, Installations / External speaker
« on: 2012-12-05, 00:41:57 »
Hi guys,

Just ordered my remoterig and will be using it with a IC-706, just wondered if there are any recommendations for a speaker to use?    Thank you

Stuart

40
General discussion forum / Re: What Radio?
« on: 2012-11-07, 02:26:01 »
Hi guys

Thanks for all the help, Ijust purchased a 706mk2G, might look at upgrading next year to the 7100 as that looks pretty cool, got the 706 for just over $600 so think that was ok.

Thx

Stu M1emb

41
General discussion forum / Re: What Radio?
« on: 2012-11-03, 14:34:09 »
Thank you very much sir that's a great help, least I know there is another option.   As far as RemoteRigs go which radio out of the two is most favored do you think?   Just looking for a good hassle free connection from Rx to Tx as it won't be easy for me to access the radio end for a little while after its setup.

Thank you.

Stuart

42
General discussion forum / What Radio?
« on: 2012-11-03, 05:00:19 »
Hi Guys, M1EMB Stuart here, need a little help please, I would like to purchase a radio to go with the RemoteRigs that I also plan to buy shortly but I am not sure what radio to pick up.

The radio needs to have HF/2/70 and not break the bank , I was looking at a IC-706MRK2g but not many around I could find. 

Can anyone please offer any advice on a good radio with the above coverage.

Thank you

Stuart@M1emb.com

Pages: 1 2 [3]