Messages

2611

General discussion forum / Re: TS480 front panel is off

« on: 2011-05-01, 13:58:22 »

hi

email me ip-address and login so I can test from here

73 de mike

2612

News / New software for the RRC-Micro PC client released (v1.2.0)

« on: 2011-04-27, 16:27:38 »

News: Keyboard CW support ( Needs RRC-1258 v2.37)
Changed: Speaker drop downs now only shows speaker devices
Changed: Mic drop downs now only shows mic devices
Fixes: Some other small fixes are done.

2613

News / New firmware for RRC-1258-all v2.37

« on: 2011-04-27, 16:25:04 »

There is a new version v2.37 available for the RCC:s

- Supports Keyboard CW from PC-Client

http://www.remoterig.com/firmwares/RRC-1258-CRC_v2.37_2011-04-26.zip

73 de mike

2614

News / New firmware for RRC-1258-all v2.36

« on: 2011-04-27, 16:23:58 »

There is a new version v2.36 available for the RCC:s

- The problem with firmware update via USB from some computers are now finally solved.
– Fixed  a bug in the SIP-busy handling.
– Fixed a bug in USB-Cat function introduced in v2.35 which caused reset in some situations.


73 de mike

2615

News / New firmware for RRC-1258-all v2.35

« on: 2011-04-27, 16:22:13 »

There is a new version v2.35 available for the RCC:s

- The USB Interface can be used for the CAT control. ( eliminate the need for RS-232 port on Laptops).
– The RRC now handles shift between Yaesu Twin and RRC-Micro automatically in mode 10. ( without need for changing settings).
– Better busy handling, prevent unwanted  double connections from inside the same router. ( need v.1.1.3 of RRC-Micro).
– No bootloader text on COM1 if Bootloader 1.9 is used.


73 de mike

2616

General discussion forum / Re: Same MAC address

« on: 2011-04-26, 06:50:07 »

Hi

That should not be possible, but is easy to fix if you send me the real serial number from the sticker inside the boxes

73 de mike

2617

General discussion forum / Re: TS480 front panel is off

« on: 2011-04-25, 22:05:09 »

If everything works besides the PTT and Mic audio then the straps are probably missplaced or broken. Check the placement against the manual, check that you have the box the same way as on the picture in the manual. If straps are placed OK check them with an ohm meter, they can have been broken when pressed into the socket, even if it's not visible. There is no settings that can be wrong, only straps or the Mic-cable from Radio-RRC to Radio.

73 de mike

2618

Hårdvara, Kablage, Installationer / Re: Yaesu FT-857 (Inte klar än)

« on: 2011-04-25, 10:05:59 »

Det är möjligt att det kan gå att göra som du säger, jag har själv tänkt i de banorna, men frågan är om det är värt arbetet. Skulle det finnas dokumentation på protokollet mellan front och radio så man visste säkert att det man gör löser problemet då vore det ju enklare. Vi är ju ett företag så vi måste hela tiden väga arbetsinsats mot vad vi tror det kan ge tillbaka tyvärr.  73 de mikael

2619

General discussion / Re: RCC control output

« on: 2011-04-25, 10:00:19 »

Hi

There is no way to control the outputs from the pc-client. But you can set an IO pin to be activated automatically when you connect or set it in on/off mode. In on/off mode you can browse to the Radio-RRC and activate and deactivate the IO pin direct from the webpage. Maybe you have to upgrade to a later firmware to get this functions.  73 de mike

2620

Hardware, Cabling, Installations / Re: RRC-radio no power LED

« on: 2011-04-21, 20:19:06 »

The RRC:s are extremly tolerant and stand against almost everything but thunderstorms. Units comming back for repair is extremly rare. I don't have a box with me so I can check what component you are talking about, but it's probably the automatic fuse. Something is consuming to much power. Remove all cables and only connect the pwr cable. If you still have the problem you have to send it in for repair.


73 de mike

2621

General discussion forum / Re: TS480 front panel is off

« on: 2011-04-21, 20:09:52 »

A ts-480 with detachable frontpanel should be used in mode 5 and there should not be a connect button on the status page.The connect and disconnect are controlled automatically from the PWR on button on the control panel. If nothing happens when pressing the pwr on button your cable is wrong or you have not set the baudrate to 57600 so the RRC can not recognize the power on command.

73 de mike

2622

Configuration of Routers, Firewalls, etc / Re: WLAN Antenna Solution on Mast, easy and reliable!

« on: 2011-04-21, 20:04:12 »

Yes I have used the big brother Powerstation 5 my self for remoting a IC-2820 on a mountain top 16km=10 mile away for years and they work perfect. I have a input level of -56 dBm so the noise margin is really big.

73 de mike

2623

General discussion forum / Re: Issues when updating the RRC's Firmware using USB

« on: 2011-04-21, 19:59:36 »

The USB-problem is solved. If you suffer from it update to v2.36 via the web interface, then it works even from USB next time.

73 de mike

2624

General discussion forum / Re: Yaesu Twin Radio Pairs

« on: 2011-04-20, 16:37:54 »

Under the "learn more" tab the following text is available "The concept was initially developed to be used by two Yaesu FT-5000:s, but when it’s now released to the public it will also work with FT-950, FT-2000 and FT-9000 in pairs. Combinations of them can also be used, a FT-5000 can be controlled by a FT-950, FT2000 and FT-9000 also."

/mike

2625

General discussion forum / Re: RRC 1258 MKII RCC Micro package question

« on: 2011-04-18, 20:55:28 »

The RRC-Micro PC-client only works in mono. It works with a all models of Radio-RRCs. If the RRC is set to Dual-RX it will be automatically changed to mono during the time the PC-Client is connected.

73 de mike