31
General discussion forum / Re: ProSiStel no link
« on: 2011-08-25, 23:17:39 »
Many thanks Guy. May you tell me about the setting, serial mode 3 or 5?
73 Nicola
73 Nicola
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
32
General discussion forum / Re: ProSiStel no link
« on: 2011-08-25, 00:32:37 »
I didn't find anythings in old post. May you help me?
73 Nicola
73 Nicola
33
General discussion forum / ProSiStel no link
« on: 2011-08-24, 00:49:21 »
Any link is avalable on page ProSistel Rotor. Any body can help me to configure and a picture to connect RS232.
My best regard
Nick 73
My best regard
Nick 73
34
General discussion forum / jitter buffer size
« on: 2010-12-10, 22:40:11 »
Guys,
how is the number to set in the fild jitter buffer size ? I use Micro PC client
Many thanks
Nicola
how is the number to set in the fild jitter buffer size ? I use Micro PC client
Many thanks
Nicola
35
General discussion forum / Re: 1258 V6 & new firmware 2.26-28
« on: 2010-12-03, 16:34:16 »
I tried also win7 and it's impossible to upgrade V6 with Setup Manager program.
Anyway it's not a problem I can do it via web.
Many thanks
Nick
Anyway it's not a problem I can do it via web.
Many thanks
Nick
36
General discussion forum / Re: 1258 V6 & new firmware 2.26-28
« on: 2010-12-03, 15:00:53 »
I using a xp sp2. I tried to upgrade by web and all it's ok.
But why happen this? V4 it's ok with Setup Manager program and V6 only via web?
73 Nick
But why happen this? V4 it's ok with Setup Manager program and V6 only via web?
73 Nick
37
General discussion forum / Re: 1258 V6 & new firmware 2.26-28
« on: 2010-12-03, 13:36:07 »
I update using Setup Manager program and the msg is " Faild program new firmware! Writed Faild."
I tried more times with 2.26 & 2.28. Only 2.25 it's ok.
73 Nick
I tried more times with 2.26 & 2.28. Only 2.25 it's ok.
73 Nick
38
General discussion forum / 1258 V6 & new firmware 2.26-28
« on: 2010-12-03, 13:19:49 »
Gentilmen,
I can't update my units (1258 V6) with new firmware 2.28. I had this problem also before with FW 2.26.
I have also old units (1258 V4) however in this case I can update them and all it work ok.
Any suggestion?
Best regard
I can't update my units (1258 V6) with new firmware 2.28. I had this problem also before with FW 2.26.
I have also old units (1258 V4) however in this case I can update them and all it work ok.
Any suggestion?
Best regard
39
General discussion forum / Re: Micro PC & DynDNS
« on: 2010-11-14, 18:47:50 »
Gentlemen,
I have solved any problem also DynDNS, with new PC-client SW.
Many thanks IZ7ANL Nicola
I have solved any problem also DynDNS, with new PC-client SW.
Many thanks IZ7ANL Nicola
40
General discussion forum / Micro PC & DynDNS
« on: 2010-11-12, 13:13:27 »
My remote rigs are composed by two 1258 couples, they respectively manage a TS480 and an IC2820, the controls and the unities radio they are connect through DynDNS (iz7anl.xxx.xxx). All work correctly and I am very happy.
The system “micro PC/HRD” works only if in the SIP sets I insert the IP router address but it doesn’t work with the DynDNS.
With the DynDNS the micro PC connects the router but HRD doesn't succeed to switch on the TS480.
It is inexplicable why DynDNS works well between 1258 units and it doesn’t work with micro PC.
I tried with 2 different computers and networks.
Gentlemen someone could suggest me a solutions?
Have you a good week end....IZ7ANL Nicola
The system “micro PC/HRD” works only if in the SIP sets I insert the IP router address but it doesn’t work with the DynDNS.
With the DynDNS the micro PC connects the router but HRD doesn't succeed to switch on the TS480.
It is inexplicable why DynDNS works well between 1258 units and it doesn’t work with micro PC.
I tried with 2 different computers and networks.
Gentlemen someone could suggest me a solutions?
Have you a good week end....IZ7ANL Nicola
41
General discussion forum / FW 2.26 no update on V6
« on: 2010-11-01, 11:31:03 »
I cant update FW 2.26 on unit 2924 V6.
It's ok on V4.
Ciao Nick
It's ok on V4.
Ciao Nick
42
General discussion forum / Re: RCC Micro PC client & TS480 ???
« on: 2010-10-31, 23:27:50 »
Dear,
I solve any problem in local 192.168.0.228, I set standard port 11000, 12000 & 5060 and all it's ok.
tomorrow DNS
many thanks for your help
ciao Nick
I solve any problem in local 192.168.0.228, I set standard port 11000, 12000 & 5060 and all it's ok.
tomorrow DNS
many thanks for your help
ciao Nick
43
General discussion forum / Re: RCC Micro PC client & TS480 ???
« on: 2010-10-31, 18:05:37 »
Dear Guy,
I have changed the password and now I can connect and hrd work but no audio.
I set audio quality 0 always 8 khz but...
Please support me again.
Many thanks
Nick
I have changed the password and now I can connect and hrd work but no audio.
I set audio quality 0 always 8 khz but...
Please support me again.
Many thanks
Nick
44
General discussion forum / Re: RCC Micro PC client & TS480 ???
« on: 2010-10-31, 14:10:12 »
Dear Mike & Guy,
I follow your suggestions but the system not work.
I check the cable (pin to pin 2-3-5 and 7-8), rtx (set 9600), radio unit (n.1958 sw 2.025), every things possible but no way.
The radio works ok in local with hrd (same cable), the radi works ok in remote with control unit (I tried in local 192.168.0.228 and dynDNS), but don't work in remote with micro pc...
I tried 2 computers: windows 7 and xp
any other suggestions?
may be it is wrong the software 1.0.12 ?
many thanks
Nick
I follow your suggestions but the system not work.
I check the cable (pin to pin 2-3-5 and 7-8), rtx (set 9600), radio unit (n.1958 sw 2.025), every things possible but no way.
The radio works ok in local with hrd (same cable), the radi works ok in remote with control unit (I tried in local 192.168.0.228 and dynDNS), but don't work in remote with micro pc...
I tried 2 computers: windows 7 and xp
any other suggestions?
may be it is wrong the software 1.0.12 ?
many thanks
Nick
45
General discussion forum / RCC Micro PC client & TS480 ???
« on: 2010-10-30, 01:35:22 »
I tried in any condition to connect those 2 unit: local, Dinamic IP,3 different computer, COM 0, COM 1 directly connected to the radio ecc
Do u have any suggestions?
can Someone help me ?
Many thans
IZ7ANL Nicola
Do u have any suggestions?
can Someone help me ?
Many thans
IZ7ANL Nicola