Messages

31

General discussion forum / Acom 2000a install

« on: 2020-08-22, 19:43:46 »

Hi there,

can anyone help me out i installed my Acom 2000a and the mydomain.ddns.webswitch.se example worked OK before i stopped working amp.

Now is showing Dynamic DNS settings correct mydomain.ddns.webswitch.se but for some reason can't be reached and only on the IP address.

Can you tell me can i change the ddns.webswitch.se url username and password be changed in the DNS settings or is there a problem just now.

Many thanks

32

General / Re: Nano and TS-480

« on: 2020-06-21, 15:19:31 »

When i press the Speak to talk button onto the USB or LSB mode it shows the TX power 200 on the top left of both my phones.  Should this only show the power out if i am in Qso with someone rather than constant 200 watts.

Not sure if this is how i am getting the bad Audio reports about the Nano app from friends and contact's i have tried to work since paying for the RRC Nano Pro 1.6.3 and testing the Pro 1.6.2 0 on second phone.

Many thanks,
Gary

33

General discussion forum / Re: Audio Problems

« on: 2020-06-12, 21:44:55 »

Hi Mitch,

I sent him a message regarding this.. All setting are still the same  you set except to work the nano from both cat plugs on RRCs

This was cable recomended to me for the nano so just got it ftom Microbit rather than getting one thats not built for this Rrc Nano or would work on my Acom 2000a when installed.

Wishing you all the best Mitch,
Gary

34

General discussion forum / Re: Audio Problems

« on: 2020-06-12, 10:12:23 »

Good Morning Mitch,

I have never changed the setting's in RRC boxes.. The cable is the correct for RRC Nano provided from Microbite.  The RRC Nano Pro 1.6.3 is installed on my Galaxy Note 10+ and tried on Galaxy Note 8 that when i downloaded app it installed RRC Nano Pro 1.6.2 for some reason just there.

Since getting this app i have tried to get it to work with no joy in my spare time. Each time i try to call out to my friend to test it to see if i have solved it they know strait away i am trying to work it and tell me audio is terrible and turn it off.

When i press the Speak button on both phones i get bad audio reports from both mobile phones. I have tried my spare 480 SAT to see if the problem was coming from this. When testing out people just tell me they can't make me out.

Again both radio's work great with RRC even when i work the control mobile with a dongle in the car The cable i have and was told is correct i got from here Mitch http://shop.microbit.se/webshop/catalog/product_info.php?cPath=24&products_id=59

73 Gary

35

General discussion forum / Re: Audio Problems

« on: 2020-06-10, 13:01:58 »

Hi Mitch,

Remoterig works get with my Kenwood 480 HX i have and the Sat version. I bought the RRC-Nano App works fine on receive.

I have the correct cable i bought from Microbit but when i TX i get bad reports about my audio when i work it from my phone.

The setting are set correct i seen for Kenwood, not sure if i can download again to a different phone to see if it's that problem.

73
Gary

Gary,

You didn't give enough details to figure it out. However, I will make the following assumptions:
1) It worked before and all of a sudden stopped working
2) You didn't fiddle with any RRC settings
3) You are referring to the audio output and not microphone audio

If these assumptions are correct, then the only place the problem lies other than a defective RRC
would be the audio cable that goes between the radio RRC and the TS-480. Double check that cable
to make sure it is okay. Every device you listed before would have no effect on output audio.

73,
Mitch DJ0QN / K7DX

36

General / Re: Nano and TS-480

« on: 2020-05-17, 12:38:07 »

* Bump: Still waiting for reply on furom and PM sent!!

37

General / Nano and TS-480

« on: 2020-03-30, 19:58:15 »

Nano and TS-480

Hello there can anyone help me out I bought Remoterig RRC-Nano PRO K over a month ago and set it up correct.  The receive is fine working it with my Kenwood 480 SAT and HX.

Getting reports from friends and contacts when I work it that the RRC-Nano PRO, the contacts think that I am on my radio and having problems with the Mic and not the app installed.

I am also looking for any video’s in how you go about installing the RC-1216H Remote control for ACOM 2000A.

38

Hardware, Cabling, Installations / Acom 2000A Install

« on: 2020-02-02, 01:08:04 »

Hello can anyone help me out, i am looking for information in how to install Acom 2000A with a Kenwood 480 Sat and RRC-1258MkII and what cable i would need.

I know i need to also get a hold of RC-1216H for radio side. Would there be a link i can buy the cables rather than making them up myself.. Many thank's for any help.

39

General discussion forum / Re: Yaesu 991a & RRC-1258MkIIs

« on: 2019-10-23, 08:04:54 »

Hello Mitch,

Many thank's for pointing the link to me.

73s Gary

40

General discussion forum / Yaesu 991a & RRC-1258MkIIs

« on: 2019-10-22, 20:50:52 »

Can anyone help me out, i am working RRC-1258 with Kenwood 480 Sat. I have just upgraded my radio to the Yaesu 991a. 

I have had a good look in the User manual for the Yaesu 991a radio's and can't find any info on how to install the setting there.

Has anyone in the forum managed to install radio OK and if so would know the correct settings in each box to work.

Many Tnanks,
Gary

41

General discussion forum / Re: Audio Problems

« on: 2019-07-14, 23:09:29 »

Hi Mitch,

I opened the control box and removed the jumpers there, Then turned radio back on and could hear once again. Placed the jumpers back again as before and all working OK, Thanks Mitch

73 Gary

42

General discussion forum / Re: Audio Problems

« on: 2019-07-14, 10:02:52 »

Hi Mitch,

No i have not changed any of the setting's in both boxes.  Turned radio on yesterday and no sound from face of radio.

Tried changing over cables and power with no joy.. Will try visit today and change jumpers in Radio today Mitch.

Many thanks Mitch for helping me out

73 Gary

43

General discussion forum / Audio Problems

« on: 2019-07-13, 20:45:16 »

Can anyone tell me if there is a fix for no audio from the Kenwood 480 Sat, this morning the audio would not work for some reason. This turns on OK and also receive fine.

Have placed new power cable's, also factory reset, changed over to second face from car, second RRC unused control connected also show the same problem also.

73 Gary

44

General discussion forum / Re: Install WiFi Pins

« on: 2019-06-23, 18:06:50 »

Many thanks Mike 73

45

General discussion forum / Install WiFi Pins

« on: 2019-06-23, 16:48:42 »

Hello there can anyone help me out i am trying to install Pinheader for WiFi card in one of my first RRC Control box.

Looking at my second box it looks like a newer build inside. The newer box looks like needs more pins installed rather than old one.

Can anyone give me some advice in how this show be in the older version with 10 pin holes rather than my second RRC Control with 14 pins.

73s Gary