Messages

16

General discussion forum / Update problem ddns?

« on: 2017-05-18, 09:10:32 »

Hi
After a shutdown of my remotestation I have problem to update ddns. When connecting power again the remote rrc are updating ddns.remoterig ok, but after a while an old ip adress is showing up. At the present time update count 729 was ok, but after a while I got ut count 611. If I edit this last update it is working ok, but why do I get up an old update count?

73 de
Alf, la1zm

17

General discussion forum / Re: Microbit Setup App

« on: 2017-03-12, 21:16:16 »

Hi!
I have the same problem with my iphone 5s (ios 10.2.1), but my  iphone 4 (ios 7.1.2) and my old ipad ( ios 9.3.5) is  working ok.

73 de
Alf, la1zm

18

General discussion forum / Websw master/slave and rcu 1216L

« on: 2017-03-06, 20:23:01 »

Hi!
Is it possible to use two webswitch in master slave together with rcu 1216L for rotator control? The slave websw is connected to A-bus, but can the rcu be connected to B-bus?

73 de Alf, la1zm

19

Feature Requests / Rrc-micro, Ptt-function for digimode

« on: 2017-02-13, 10:21:43 »

Hi!

Any news about rrc-micro 1.11.0? I have been searching the forum, but can not find any info?
I am using my ts-480 with rrc- mico, virtual cables and wsjt-x, and it is working so nice except for the ptt-function.

73 de Alf
La1zm

20

Konfiguration av Routrar och Brandväggar / Re: Huawei e5186s og Netcom/Telia 4G

« on: 2017-02-03, 19:19:41 »

Erfaring etter et år med remoterig og 4G:

Har nå hatt remoterig i daglig drift i over et år, med 4G på radiosiden. Utvendig panelantenne for 4G er monter og det  har vært nødvendig å resette modemet noen ganger, men remoterigutstyret feiler aldri! Startet med et brukt sett rrc, men har utvidet med flere rrc og webswitcher. Bruker ic-706, ts-480 og flex3000/pc. Flex3000 , start av laptop med solenoid, motorstyrt antennedisconnect og antenneswitcher styres alt av webswitch fra Microbit, aldri feil! Stasjonene er daglig i drift, aldri feil på utstyret fra Microbit. Nesten 100% oppetid på 4G sambandet fra Telia. Håper på et nytt problemfritt år, hi.

73 de
Alf, la1zm

21

General discussion / Re: Software access to PTT function

« on: 2017-02-03, 15:58:00 »

Hi
Any news about rrc-micro 1.11.0?
I have been using my ts-480 with rrc- mico, virtual cables and wsjt-x, and it is working so nice except for the ptt-function.

73 de Alf
La1zm

22

General discussion forum / Re: Audio Feed

« on: 2016-12-16, 20:36:10 »

I am using 1274B, and it is working ok with VAC.

73 de
Alf, La1zm

23

General discussion forum / Re: Audio Feed

« on: 2016-12-16, 09:33:12 »

Hi!
I have been using rrc-micro for digimode on my remote Ts-480. I use virtual audio cables (VAC) in my laptop for audio. This is working very nice, except for the ptt-function, I have to push the button for transmit. I think there will be a solution for that in rrc-micro 1.11.0 ?

73 de
Alf, La1zm

24

Konfiguration av Routrar och Brandväggar / Re: Huawei E5186-86A6 router

« on: 2016-10-20, 15:56:29 »

Hi
I am using e5186 on radio side. I have connected two rrc and websw and its working ok. If you are sure you get a public ip from your provider, it is easy to do port forwarding. Just go to security/virtual server/ and put in ports and ip. For one of my connection I am using:
192.168.8.228 ( local port on router)
Port 13000--13002, 80 and 23

73 de
Alf, La1zm

25

Konfiguration av Routrar och Brandväggar / Re: Huawei E5186-86A6 router

« on: 2016-07-26, 19:39:01 »

Hi!
I have been using 4G on remote site with Huawei e5186 from Telia (Netcom) for half a year now with no problem.( Changed Apn to vpn.netcom.no and port forwarding under settings/security/virtuel server)

73 de Alf, la1zm

26

Hardware, Cabling, Installations / Re: Wifi and old rrc-1258

« on: 2016-01-25, 15:20:26 »

Zyxel wireless access point, wap3205 v2, used in client mode is working perfect with my old control rrc-1258 now.

73 de
Alf

27

Hardware, Cabling, Installations / Re: Wifi and old rrc-1258

« on: 2016-01-20, 19:41:13 »

Thank you for info, maybe I will buy a new set of rrc. I have been using an old set of rrc for test, radio on 4G, and I think this is the solution for my local noise problem. The setup is working perfect, and I look forward to move the radio part to my cabin qth ( no local noise)

73 de
Alf

28

Hardware, Cabling, Installations / Wifi and old rrc-1258

« on: 2016-01-20, 14:25:30 »

Is it possible to install a wifi card in a very old control rrc-1258 v.1. (Ser. No. 1558)?

73
Alf

29

Konfiguration av Routrar och Brandväggar / Re: Huawei e5186s og Netcom/Telia 4G

« on: 2016-01-10, 11:33:09 »

Tilleggsinfo:
Glemte å nevne at det selvfølgelig fungerer fint med port forwardingav av port 13000--13002 og 80 i Huawei ruteren. (Konfigureres under settings/ security/virtuell server. Husk å bruke Apn-navn vpn.netcom.no i profile setting i quick setup)

30

Konfiguration av Routrar och Brandväggar / Re: Huawei e5186s og Netcom/Telia 4G

« on: 2016-01-09, 17:32:26 »

Har nå fått prøvd dette selv, og her er tilbakemelding, hi.
Oppsett med Icom 706, rrc-1258 v.1 på centralside og mkII på radioside. Dette fungerer utmerket med Netcom 4G/Huawei e5186 på radiosiden. Kun endring til DMZ for ip adr i Huawei routeren. Veldig bra installasjonsveiledning fra Remoterig. (største problemet var feil i plugg for separasjonskabel på radiosiden, fabrikasjonsfeil i fabrikkny kabel)