Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - IZ0JOJ

Pages: 1 2 [3]
31
Hi Mike,
many thanks for your reply.

Yes, I copied the "DDNS hostname given from you remote rig" from the Radio-RRC to the SIP contact box in the Control-RRC.

On the radio page (box with the body of Kenwood Ts 480) everything looks Okay. No error.


On the control radio page (box with the panel of Kenwood TS 480) the DDNS is correctly solved (I mean there is the IP of my remote house)


other parties: there is an IP number that... I don't know what is.. is completely strange (any ip I knew)



.... while on the control box side - there is other parties: 0.0.0.0

Last update: after playing with the DMZ on the router (of radiorrc)


thanks

32
 :PHello to everybody.
Thanks for reading my request of help.

I own a kenwood ts 480 plus two remoterigs devices. Last software version mounted on.
I successfully transmitted (france to italy) remotely - through direct IP connection (I asked to my father to give me his IP number and open DMZ on the router) but...now I am trying to setup the DDNS service offered by remorerig. It doesn't work. I don' tunderstand why.
Is there something I should know? The device created, as written in the manual, an user name and password and I copied and pasted the name of the server...on the control device... but still doesn't work.

Any suggestions?

Thanks

33
Dear Mitch, :D
Problem partially solved.

It was not a problem of straps :-)
It was the ethernet cable not working very well !!

Now when I push to talk...I got the red light...and frequency stay the same (no up no down) BUT I do not have modulation!
I mean - no power output - no modulation - no bar - nothing is moving !

Can you "help"?

Thanks

34
Dear Mitch,
Thanks for your answer.

Yes, I installed the cable but is a standard ethernet cable. I thought I should have change this cable! If you can confirm to me that there this STANDARD cable I bought on internet is okay ... I am happy.

...mumble mumble I still do not understand where could be the mistake.

35
Hello!
I found a previous post by HB9EMS in this remoterig forum who had a similar problem and he solved this:

"The cable AUX/MIC-connector from the Radio-RRC and
the MIC-connector from the TS-480."

...can somebody clarify this for me?

Many thanks

36
Hello Mitch,
Many thanks for your help.
I really appreciate it.

Sorry...but... I still don't understand.
Please see hereby a zoom on the previous image I posted : I installed the strap between the pins numbered "3 and MIC <--"


Is not this one?

I am confused. Sorry.
This is the diagram from the instructions I followed.


Many thanks if you can help!


38
Hello mitch,
Cannot you see my pic I just took?
If you see it, do you agree they are in the correct places? No inversione i believe.
What do you think and how should I test them?

Sorry for stupid questions

39
Dear Mitch,
Many thanks for your answer.

Okay I confirm JMP1 is WITHOUT the strap
JMP5 is with the strap.

The microphone is the standard one the comes out with the Kenwood TS 480

Here my straps > can you confirm everything is okay?


Thanks

40
 ??? Dear DJ0QN,
Many thanks in advance for your help.

> First of all can you clarify for me:
JMP1 jumper one : is with the strap on or off? This jumper (on the Control-RRC only) as written on the instructions should be with the strap OFF (WITHOUT) for a KENWOOD TS 480.

And JMP2 ? As well should with the strap OFF (without).

Thanks

41
Hello somebody help a poor ham who's trying to transmit via remorerig with his KENWOOD T 480?

I have TS 480 configured with remote rig and... everything is working except MIC.
Everytime I try to transmit, the led PTT becomes red but... I cannot modulate : the frequency shifts up of khz ...

What's going on?
I saw the instructions : it looks like I did everything well. The jumper 1 is the only one OFF (thing is out).
The other 3 JMP are with the thing on.

Thanks in advance
73

Pages: 1 2 [3]