Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - VK2DAG

Pages: [1]
General discussion forum / Re: RTL-SDR V3
« on: 2019-04-20, 07:27:44 »
Get VirtualHere.  It's what I use for a SDR RTL, SDR Softrock and rotator control.


General discussion forum / OTG PTT input for Android App
« on: 2019-03-02, 03:36:53 »
Is there a way to external switch the PTT in the android app with an On The Go cable?


When I went down the remote rig path I decided I needed a TS-480.  I found a used HTX which has no tuner but the sale came with the AT200Pro, which is the 200 watt model.  Neat fix.  I normally hang resonate antennas for each band and haven't really need a tuner.  Now that my "rig" is over 350 km away it's nice to have the tuner until I get my antennas sorted out.

It has worked without a hitch.  As Lou said I press the PF button and it tunes in a few seconds.  Good kit.

Matt  -VK2DAG-

Configuration, RRC 1258 / Re: Help understanding I/O
« on: 2019-01-14, 10:35:11 »
Mmm nobody!  :'(

Configuration, RRC 1258 / Help understanding I/O
« on: 2018-12-11, 09:30:40 »
Hi Guys.

I'd like a clear understanding on the use of the I/O settings please?

My goal is control 3 remote relays with 3 local switches,  Is this possible?  How do I wire them?  Does IN0 = OUT0, IN1 = OUT1 etc?  Do I use I/O or connect?

Or can I only control 2 remote relays with switches, and one remote relay with ON/OFF web page?


Matt  -VK2DAG-

Hardware, Cabling, Installations / Re: USB rotator interface
« on: 2018-10-30, 06:16:36 »
Try a small computer like a Raspberry Pi at the remote site and install "VirtualHere"

Very easy to set up.  It will make available any remote USB device as if it is plugged in to your local PC.

Matt -VK2DAG-

Pages: [1]