Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - I4GAD Enrico

Pages: 1 [2] 3
16
General discussion forum / Re: FSK audio monitoring
« on: 2012-04-24, 11:37:07 »
Yes Mike, you are absolutelly right. In my RRC boxes "Continuous TPT tx" it is set off. Later on I'll set it properly and will make the test. I'll let you know....

Thanks for the help.
73 Enrico

17
General discussion forum / FSK audio monitoring
« on: 2012-04-24, 08:23:21 »
Since the firmware rel. 2.46 the fix  Speaker is now not muted when sending RTTY makes it possible to hear the RTTY-sidetone from the Radio should be available, but after the firmware update (now to 2.55), when I send FSK message still no audio is heard.
Does any thing wrong on my side ?
Enrico I4GAD

18
General discussion / Re: PSK and AFSK
« on: 2012-04-18, 16:34:43 »
Hams are really hard to please hi hi .....
Ciao
I4GAD Enrico

19
Roland, after some quick preliminary test, the phone section works great while the CW keyer seems to have the same problem that appeared after the rel 1.2:
some keyed  character is transmitted two o three times randomly.
The TRX Manager is working perfectly !!
Thanks again for the great effort in multiple software Control support !
Best regards to all the team.
Enrico I4GAD

20
Excellent business Roland ! Now the client is up and running....with my TRX-Manager (and now I'm really happy) !!!!!
Thanks indeed for your help !
Best regards.
Enrico I4GAD

21
The config file was sent by email to roland@microbit.se.
Have you got it ?
Enrico

22
Understood !!! Please find enclosed the Setup Log of my first temptative and the one of the latest.

23
Really strange Roland, the TEMP directory is there but as tyou can see on the attached picture,  no Setup Log into it.


24
Roland,
the problem seems really big !! No Setup Log at all in my computer.
What can I do ?
Enrico

25
Hi Roland,
thanks a lot for the immediate answer. I'll follow your instructions and forward the requested files.
We'll gets in touch after my homework will be done.
Enrico

26
Hi All,
by mistake, I began to install the new client on my PC (running W7) with the box (1274A) hocked to the USB port and the process get stucked; after some strange interaction the installation gets apparently to the end but when I try to run the program, the program window do not appear on the screen even if the process is running.
I've tried then to uninstall the client in  order to redo the correct installation, but I got a message saying that not all the component were uninstalled automatically and some one must be uninstalled manually.
At this point I'm not able to get through the correct installation process and the client do not work as said above.
Does some one in Microbit have a suggestion to get over this problem ?
I've tried to install the cilent on an XP computer and it works fine.
Thanks in advance.
Enrico I4GAD

27
General discussion / Re: HamRadioDeluxe performances
« on: 2012-02-28, 14:41:46 »
Hi all,
after the message posted by Joe W4WT,  I've downgraded my RRC Micro to the oldest version still available on my disk (1.3.0) and surprisingly the system works pretty well now.
Ham Radio Deluxe performances are acceptable and also the CW section works fine with no repeated characters.
I'll remain to this version waiting for the new rewritten application.
Thanks again Joe for your answer.
Enrico I4GAD

28
General discussion / Re: HamRadioDeluxe performances
« on: 2012-02-27, 15:57:00 »
Hi Roland, hi all,
I'm very glad the see all that news: the confirm of my impression on HRD 1.5 and the plan for a new version of the Client with support of TRX-Manager !
I would be also very glad to beta test the new relaese when available because I'm an intensive user of TRX Manager that works pretty well for me with when I use the 1258 MKII. 
Have you got the opportunity to check the CW functionality of the Client ? I'm still having random duplication of characters keying code on the keyboard and also using the memories, and this prevent me from using CW in remote mode with the S/W Client.
Best regards.
Enrico Gardini I4GAD

29
General discussion / HamRadioDeluxe performances
« on: 2012-01-30, 12:18:36 »
Hi all,

after a very positive experience RRC 1258MKII to remote control my rig (TS-480 + SPE 1K + SteppIR 4El..etc) in CW,SSB and RTTY,
I've also tried to experiment the RRC-Micro PC Client (sw release 1.4.0)
After some initial trouble, I succeded to make it running on my W7 lap top,  but I found it almost useless due to the very bad performances of HRD software control, very slow and unreliable also when I'm connected to the rig through the LAN.
The software react with big delay to VFO changes and also tuning is a very annoying exercise. No way to work a DX in safe split mode, because time to time the TX VFO is not activated and the result is in the best case a "Good Morning !!!"..... 
I'm very frustrated by the HRD behaviour, but right now my preferred control program (TRX-Manager) in not supported yet by the PC Client and I cannot see other possibility rather then using HRD.
Does anyone use the same set up with better results ?
Moreover, I found also some problem on the PC Client: when I try to send CW code  keying characters on the keybord I often got random character duplication and this make obviously useless also the important CW functionality.
Am I doing something wrong ?
Thanks for any suggestion.
73' I4GAD Enrico

30
General discussion forum / Re: Very short audio dropout
« on: 2011-10-21, 08:08:12 »
I've experinced similar problems on my remote activity. I discovered it was due to my external monitoring webcam that took the whole upload band of my home lan every minute during the image uploading to the remote FTP Server.
Just changed the interval to 15 minutes and now the audio dropout frequence can be acceptable.
I suggest to check the bandwith of your ADSL connection on both side and see if you have some program/device who saturate periodically the lan.
73...Enrico I4GAD 

Pages: 1 [2] 3