Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ea3in

Pages: 1 ... 3 4 [5] 6
61
Advancing step by step

Now I can control the Ts-480 via the front serial connectores. BTW, the radio-RRC cable must be crossover

It works ok between two hardware RRC's.

Now, I'm trying t connect the virtual COM1 port in PC-Client (OK regarding audio, micro, PTT) but my HRD can't access the remote 480.

Cables at the radio side are the same. So they are ok

How can diagnose what is happening?



 

62
General discussion forum / PC-Client and DNS resolution
« on: 2010-07-28, 19:25:42 »
I think that PC Client should wait for a little bit longer or something when trying to resolve your remote SIP address.

Very often I need to make a ping to my remote RRC in order to put in cache before opening the connection. I not I get a DNS resolution error.

63
Hello

I am unable to setup a serial connection between my HRD or ARC480 and my TS-480
Either with PC-Client or with 2 RRC's

When using the TS-480 ther is no problem

I think I don't understand something:

I have 1 serial port in the front and 1 serial port un the back of the RRC's
Is it COM0 or COM1?

Any crossover serial cable is needed?

Thanks in advance


64
I am not sure if I will translate it right. My Win7 is in spanish


Go to control panel
System and Security
Change  user account control configuration
Select the lower position. Never notify

This worked for me

65
Solved!!

It was a windows security problem


66
General discussion forum / Re: PC-Client setup
« on: 2010-07-23, 21:48:32 »
Now working on this laptop

Thanks

67
My RRC is up and running in one of my laptops (Windows 7 premium)

Now I am trying to install in another netbook that I have for radio issues.

I get this error:

setupdicreatedeviceinfo failed with 5: access denied

when the setup program is creating the virtual serial ports

I am administrator
OS is Windows 7 home

Any suggestion?

68
General discussion forum / PC-Client setup
« on: 2010-07-23, 10:25:44 »
Hello

I'm not able to put my PC Client in working order.

Probably I don't understand its behaviour yet

Software is installed without errors in one of my laptops (except that Location doesn't show microbit)

I have only set up the SIP part, because I plan to use it only for audio and PTT.

FIRST QUESTION: Is it mandatory to have a COM setup in order to establish a SIP link?

SECOND: My radio is a TS-480. Is it mandatory to use it via the serial port? So is it mandatory to have 2 connections: one serial ant the other with standard cable I use when using the remote RRC?

I will come with more questions. Sure

Thanks in advance




69
General discussion forum / Re: SIP link initiation
« on: 2010-01-21, 17:14:57 »
Thanks Mike, but I amb a MKI user.

Any chanc with the old RRC?

Thanks

70
General discussion forum / Re: SIP link initiation
« on: 2010-01-19, 18:48:48 »
Any idea on this issue?

Thanks

71
General discussion forum / SIP link initiation
« on: 2010-01-16, 17:39:48 »
Hello again.

In radio option 4 (General Kenwood) with no control panel, Is it possible to initiate a SIP connection without the connect button of the web interface?

Might be grounding a pin?

72
General discussion forum / No link since a determined moment
« on: 2009-12-23, 20:52:31 »
Hello

I don't know why,  now  I am not able to establish a connection from the Internet through my NATed ip address. Everything seems to be as before.

I think it happens after the upgrade to version 1.44.

Is there any way to check if 11000, 12000 and 5060 UDP ports are available?

BTW if I make a connection in the same LAn, eberything is ok

73
General discussion forum / Software control side
« on: 2009-11-01, 12:55:19 »
Hello

Is it possible to use any software (i.e. a SIP client) to connect directly from a PC to the radio site (where the RRC is available)?

The idea is to be able to use the radio through HRD or similar, with audio through RRC when your are in an airport, hotel et c.. without your remote RRC unit

Thanks

74
General discussion forum / TS-2000 experience
« on: 2009-10-11, 17:31:39 »
Hello

After being succesfull with the TS-480, I've setup a remote audio and mic connection for my TS-2000. It works ok as expected. I can control the TS-2000 from my PC but I would like to take a try to the RC-2000.

Anyone has an opinion on that?
User experience is also nice?

Regards

75
General discussion forum / TS-480 & TS-2000
« on: 2009-09-24, 06:43:10 »
I have a TS-480 which I use with my remote rig pair.

I also have a TS-2000. Can I convert the radio unit or do something to share between these type of radios?

Pages: 1 ... 3 4 [5] 6