Author Topic: Please help me get things working over the internet  (Read 8437 times)

KV6T

  • Newbie
  • *
  • Posts: 14
    • View Profile
    • Email
I have been at this for a couple of days now, still no joy.

The setup works on my LAN, does not work at the control QTH.  Also tried at a friend's QTH.  Both of us have Comcast Cable internet.   I am able to configure the Radio-RRC box remotely via the internet from the control QTH, but sometimes the browser times out.   I get a continuous alarm tone when I attempt to turn on the head unit of the TS-480.

1) I configured the Control-RRC for DHCP and the Radio-RRC with a static IP.

2) Disabled SIP ALG and SPI at the control QTH router (Netgear WGR614v7).   I did not see a way to do this on the Asus router at the radio QTH, but I will check again today when I get up to the radio site (70 miles away)

3) Changed SIP port to 5061 on both boxes in case of conflict on 5060 (I do have comcast phone service at the Control QTH)

4) sip contact is set on Control-RRC to the remoterig ddns domain name

5) on the Radio-RRC, Extern IP/Host gets filled in correctly as an ip address

Here is the info and status for each box.  Thanks in advance!

Control-RRC:

Info

Name   Value
Company   Microbit
Product   1258
PID   4
Hardware   6
Software   2.50
Bootloader   1.9
Compiler   4.1.2 (WinARM 4/2007)
Build   Dec 15 2011 15:15:54
ROM/RAM   372540/50740
ETH-RAM   2944 (max 3kB!)
ResetSrc   0 [3]
Uptime   878
    
Serial number   4498
MAC address   00:1e:fd:01:88:32
IP address   10.0.0.10
Netmask   255.255.255.0
Gateway   10.0.0.1
DNS   10.0.0.1

Status

Name   Value
Control panel   ON
Radio   OFF
Connection status   Disconnected
SIP status   Idle
Last SIP error   None
RTP/UDP audio status   Disconnected
UDP cmd status   Disconnected
SIP command timeout   0
Rx Jitter buffer size   4
Rx Jitter delay   3
Dual Rx   0
SIP Out port   5061
SIP In port   5061
Audio Out port   0
Audio In port   0
Command Out port   0
Command In port   12000
External SIP In port   5061
External Audio In port   11000
External Cmd In port   12000
Other party   0.0.0.0
Input 0   High
Input 1   High
Input 2   High
Output 0   Low
Output 1   Low
Output 2   Low
DNS status   No Dns Server configured
Active profile:   Default
PTT status:   OFF


Radio-RRC:

Status

Name   Value
Radio   ON
Connection status   Disconnected
SIP status   Idle
Last SIP error   None
RTP/UDP audio status   Disconnected
UDP cmd status   Disconnected
SIP command timeout   0
Rx Jitter buffer size   4
Rx Jitter delay   3
Dual Rx   0
External IP   67.180.114.13
SIP Out port   5061
SIP In port   5061
Audio Out port   0
Audio In port   0
Command Out port   0
Command In port   12000
External SIP In port   5061
External Audio In port   11000
External Cmd In port   12000
Other party   0.0.0.0
Input 1   High
Input 2   High
Output 0   Low
Output 1   Low
Output 2   Low
Dynamic DNS status   OK
Ping status (watchdog)   Off
DNS status   OK, remoterig.com = 193.202.110.185
Active profile:   Default
PTT status:   OFF


Info

Name   Value
Company   Microbit
Product   1258
PID   4
Hardware   6
Software   2.50
Bootloader   1.9
Compiler   4.1.2 (WinARM 4/2007)
Build   Dec 15 2011 15:15:54
ROM/RAM   372540/50740
ETH-RAM   2944 (max 3kB!)
ResetSrc   0 [3]
Uptime   6592
    
Serial number   4407
MAC address   00:1e:fd:01:87:d7
IP address   192.168.1.8
Netmask   255.255.255.0
Gateway   192.168.1.1
DNS   192.168.1.1




dj0qn

  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Please help me get things working over the internet
« Reply #1 on: 2012-01-25, 18:48:48 »
It looks to me as if it is one of two things wrong:

1) Do you have the radio RRC''s dynamic DNS address entered correctly in the "SIP Contact" field?
2) Have you correctly forwarded all the ports in the radio RRC's router (or placed in the DMZ)?

I can send you my installation checklist if you drop me a mail at dj0qn (at) darc.de, but I suspect it is one
of these two items.

73,
Mitch DJ0QN / K7DX

KV6T

  • Newbie
  • *
  • Posts: 14
    • View Profile
    • Email
Re: Please help me get things working over the internet
« Reply #2 on: 2012-01-25, 18:55:40 »
Holy cow, somehow the first few characters of the sip contact got clipped off when I copied and pasted.  I fixed it and it works now.

Vielen Dank Mitch!!!!!


sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3007
    • View Profile
    • sm2oan
    • Email
Re: Please help me get things working over the internet
« Reply #3 on: 2012-01-25, 19:51:33 »
I looked into your radio RRC and it looks like you are up and running now ?

73 de mike

Name   Value
Radio   ON
Connection status   OK
SIP status   Connected/transfering
Last SIP error   None
RTP status   Excellent(60)
UDP cmd status   OK(45)

dj0qn

  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Please help me get things working over the internet
« Reply #4 on: 2012-01-25, 19:53:04 »
Yes, he had the SIP contact entered wrong and that was the problem  ;)