RRC 1258 Support in English > General discussion forum
Problem - DHCP and RRC Manager
DM1CG:
Hello all
with RRC Manager i didnt can get a connection to the control unit
if the unit do DHCP.
What is the way to config the unit ?
vy 73 de Carsten
sm2o:
Hi
You have to explain more about your problem. RRC-manager uses the USB connection is independent of DHCP.
73 de mike
DM1CG:
Hello Mike
I set the unit to DHCP and reboot them.
If i have no DHCP Server and the unit get no IP Adresse i didnt can connect
the unit via the RRC USB connection.
The RRC Manager shows RRC connected, but when i will get the SETUP
i get no answer from the RRC.
best 73 de Carsten
sm2o:
Hi
I have tested that several times and the RRC manager works 100% even if the PWR LED is flashing because the network contact is missing.
73 de mike
DM1CG:
Hello
RRC have 100% connect on the LAN over a switch !
But if i didnt get an IP adress the PWR LED is flashing.
IF i have no iP adress i didnt can connect the RRC via USB.
What is my way to change the IP settings from DHCP back
to an static IP ?
directly if i start the dhcp server - the PWR LED stoped flasching
(Unit get an IP) and i can connect via RRC Manager
best 73 de Carsten
Navigation
[0] Message Index
[#] Next page
Go to full version