Author Topic: RRC-1258 behind Firewall in DSL-Router Vodafone Easybox A 600 W-LAN  (Read 6674 times)

DL5FAB

  • Newbie
  • *
  • Posts: 21
  • Use of RRC and RRC PC Client to remote IC706
    • View Profile
    • QRZ.com
Reaching the Radio Controller over the Internet voia DSL-Line and Vodafone Easybox A 600 W-LAN router works fine with the firewall switched-off. However, the following ports are opened than:
                          Radio Controller    LAN                                  WAN       Public IP
155   UDP   192.168.1.228   5060   188.107.211.158   5060   82.113.106.106   3459
156   UDP   192.168.1.228   12000   188.107.211.158   12001   82.113.106.106   12000
157   UDP   192.168.1.228   11000   188.107.211.158   11001   82.113.106.106   11000
158   UDP   192.168.1.228   12000   188.107.211.158   12000   82.113.106.106   13930
159   UDP   192.168.1.228   11000   188.107.211.158   11000   82.113.106.106   19643
160   UDP   192.168.1.228   5060   188.107.211.158   5060   82.113.106.106   3459

I do not undersand the outgoing ports number 12001 and 11001. Can somebody explain?

I have tried the following:
Firewall switched on and Radio Controller into DMZ area. Port Mapping activated as follows:

Nr. LAN IP           Protokolltyp LAN Port Öffentlicher Port Aktiviert Einstellen
1    192.168.1.228 UDP 5060 5060     
2    192.168.1.228 TCP 80 80     
3    192.168.1.228 TCP 23 23     
4    192.168.1.228 UDP 12000 12000     
5    192.168.1.228 UDP 11000 11000     

this does not cure the problem. The Radio Controller Web Server is perfectly reachable through the firewall.

Can somebody give me a hint?

73 Manfred, DL5FAB

 

DM1CG

  • Jr. Member
  • **
  • Posts: 68
    • View Profile
    • Email
Hy Manfred

I have switch the SIP (Audio) Port to 5560 - because 5060 is sometimes blocked in some network
(some AGBs say its not allowed to do VOIP (SIP)).

The rest looks good.

best 73 de Carsten



DL5FAB

  • Newbie
  • *
  • Posts: 21
  • Use of RRC and RRC PC Client to remote IC706
    • View Profile
    • QRZ.com
This is what I also thought. Port 5060 is used by Vodafone for the VoIP but in my case it is not forwarded into the LAN (I hope). I made a test with Port 5070, which works fine but does not solve the problem with the firewall. I managed today to set-up connection via O2 UMTS Pre-paid from Controller to Internet and Radio on the the DSL connection but still with Firewall switched-off. Manfred

DL5FAB

  • Newbie
  • *
  • Posts: 21
  • Use of RRC and RRC PC Client to remote IC706
    • View Profile
    • QRZ.com
I got the RRC-1258 now working behind the firewall with the following settings:

Controller  behind the Firewall,
no DMZ
DynDNS activated
NAT on

Port Mapping:
IP                  Protocol LAN              Port Public Port
192.168.1.228 UDP      12060             12060     
192.168.1.228 TCP      80                  80     
192.168.1.228 TCP      23                  23     
192.168.1.228 UDP     12000              12000     
192.168.1.228 UDP     11000              11000     

Special Applications:
Incoming port 11000 triggers ports 11000,12000,12060

Firewall switched-on but the following features enabled/disabled:

Intrusion Detection Feature:

SPI and Anti-DoS firewall protection  - off
RIP defect  - on
Discard Ping To WAN Interface  - on


Stateful Packet Inspection:

Packet Fragmentation  - on
TCP Connection  - on
UDP Session - on
FTP Service  - on
H.323 Service  - on
TFTP Service  - on

73
de Manfred