Author Topic: Elecraft Twins K3/0 and K3100  (Read 2473 times)


  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
Elecraft Twins K3/0 and K3100
« on: 2012-10-31, 22:47:05 »
I have the two connected on my LAN. The K3/0 controls the K3 ok except there is no audio passing between the K3/0 and the K3. CW and other commands seem to work OK. Any help would be gratefull.


  • Hero Member
  • *****
  • Posts: 2150
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Elecraft Twins K3/0 and K3100
« Reply #1 on: 2012-11-01, 00:40:46 »
Have you checked to make sure that you have it wired correctly per the manual at:

Important is the RJ45 cable between the AUX/MIC and K3 & K3/0 as on page 12 and 13.

The rear input needs to be selected in the radio's menu.

If this is still not working, let us know.

BTW, this was posted on teh wrong section, as this has nothing to do with the Micro PC Client.

Mitch DJ0QN / K7DX