Author Topic: TS-2000 Control RRC and Signalink USB  (Read 3092 times)

OH6KVP

  • Newbie
  • *
  • Posts: 3
    • View Profile
TS-2000 Control RRC and Signalink USB
« on: 2010-03-16, 10:30:40 »
Hello everyone.
I have a Kenwood TS-2000 without the RC-2000.
Does any idea how to connect the USB Signalink to Control RRC.
There is not spkr connection in aux/mic (RJ45).
Or is there something other way to work  digimodes remotely?

Best 73 de OH6KVP Sami

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 2621
    • View Profile
    • sm2oan
    • Email
Re: TS-2000 Control RRC and Signalink USB
« Reply #1 on: 2010-03-16, 11:05:06 »
Hi

There is a speaker out in the jumper socket. Look at the IC-706 page http://www.remoterig.com/en/ic706anp.htm. Just add an red jumper wire to the connector pin number you want

73 de mike

OH6KVP

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: TS-2000 Control RRC and Signalink USB
« Reply #2 on: 2010-03-23, 09:21:57 »
Thanks Mike.
It is working perfectly. I had just switch jumper 2 in signalink, so I got more volume.
CW keying via USB is working too with HRD+DM780.
Sometimes a virtual serial port, however, doesn't work...
Reboot the computer helps, but it is not so fun :(

73 de OH6KVP Sami