Author Topic: Power light flashing  (Read 4189 times)

k6jv

  • Newbie
  • *
  • Posts: 15
    • View Profile
    • Email
Power light flashing
« on: 2010-07-02, 03:08:44 »
Remote has been working fine, all of sudden power light flashes and can not control radio. The IP is still valid as I can use the browser to get into the remote (192.168.1.227). If I remember the flashing lights means it has not picked up an IP address. I even changed it to DHCP and connected directly to cable modem and got the same response.

Ideas?

Thanks,

Doug
K6JV

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3004
    • View Profile
    • sm2oan
    • Email
Re: Power light flashing
« Reply #1 on: 2010-07-03, 21:22:02 »
The power LED is flashing if.

- If DHCP is activated and the RRC do not get a IP from the DHCP server.

But the most common reason is:

- you have set a SIP-contact with a DNS name ( not a IP-adress) and the RRC can not resolve the DNS name most likely beacause
the IP of the DNS server is wrong at the IP-settings

73 de mike.

k6jv

  • Newbie
  • *
  • Posts: 15
    • View Profile
    • Email
Re: Power light flashing
« Reply #2 on: 2010-07-03, 23:18:09 »
Dyndns cancelled by dns name due to inactivity. Reassigned and working again.