Author Topic: Straight key connecting please HELP !  (Read 10729 times)

hb9gce

  • Newbie
  • *
  • Posts: 21
    • View Profile
    • Email
Straight key connecting please HELP !
« on: 2011-01-07, 18:22:03 »
Hi all
After some successful qso's in cw with my paddle I tried to connect my straight key, but sincerely I don't understand where to connect the 2 terminals of the key. From the i/o output on the control rrc I connected PIN 4 and 8 but nothing happens. I dont' want to try other combinations and cause a damage to the unit  :-[
What is wrong ?
Vy 73s to all
de hb9gce
andy  :o


DL7AV

  • Newbie
  • *
  • Posts: 21
    • View Profile
    • Email
Re: Straight key connecting please HELP !
« Reply #1 on: 2011-01-12, 18:52:35 »
Hi Andy,

have you set IO Settings / IN0 mode = Keyer?

I use internal keyer with paddle PAD input, and external keyer on 4/8 of the RJ45 connector.

73,  Thomas  DL7AV

hb9gce

  • Newbie
  • *
  • Posts: 21
    • View Profile
    • Email
Re: Straight key connecting please HELP !
« Reply #2 on: 2011-01-12, 21:14:34 »
Hi Thomas thanks
Now the Rig is completely working, straight key, paddle, mic. etc. !
My RJ45 cable had not exactly the same colors of the PIN of the manual....
73s de HB9GCE
Andy

sq6nej

  • Newbie
  • *
  • Posts: 1
    • View Profile
    • Email
Re: Straight key connecting please HELP !
« Reply #3 on: 2014-01-13, 12:22:27 »
Hi there,

I have similar problem with using straight key with remoterig.

I already connect radio unit to TRX body via stereo cable with Jack's 3,5mm (RR pad) and 6,3mm (ic-706 Body).

At the control unit  I connect  key to PAD 3,5mm jack and configure IN0 as keyer , and Iambic type "Old type , squezze keyer" 

With this configuration when I try to transmit I heard from control unit speaker that keyer is working as electronic key (not straight key)

How I must change configuration to use straight key with local tone and PAD Jack ?

SQ6NEJ Kuba


sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3004
    • View Profile
    • sm2oan
    • Email
Re: Straight key connecting please HELP !
« Reply #4 on: 2014-01-13, 13:13:34 »
Straight Key must be connected to I/O connector (RJ45) In0 not to the pad jack

73 de mike