Author Topic: Network Bandwidth Requirement for TS-480 and TS-2000?  (Read 5340 times)

w4rdm

  • Newbie
  • *
  • Posts: 3
    • View Profile
What is the bandwidth required for the Kenwood TS-480 and TS-2000 to operate properly with Remoterig RRC-1258MkII?
I have a Verizon 3G usb modem that I want to use.

TNX,

Ron W4RDM
www.hexkit.com

dj4mz

  • Jr. Member
  • **
  • Posts: 97
    • View Profile
Re: Network Bandwidth Requirement for TS-480 and TS-2000?
« Reply #1 on: 2010-04-17, 12:03:18 »
Hi Ron,

the bandwidth depends on the settings. Maybe this listhttp://www.remoterig.com/en/codec.htm helps.

I don't use a TS-480 or TS-2000 but with my IC-706 and default settings for the codec I have around 210kbit/s.

vy 73, Simon (DJ4MZ)

w4rdm

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Network Bandwidth Requirement for TS-480 and TS-2000?
« Reply #2 on: 2010-04-18, 06:16:58 »
Simon,
 TNX for the link. That was exactly the information I was looking for.

73,

Ron W4RDM

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3004
    • View Profile
    • sm2oan
    • Email
Re: Network Bandwidth Requirement for TS-480 and TS-2000?
« Reply #3 on: 2010-04-18, 18:37:28 »
Hi

The lowest audio codec needs 80kBit/s and then the control channel needs bandwitdh when rotating the VFO so 128 -256 kbit/s is good to have available

Remember that you need a router between the USB-stick and Remoterig boxes

73 de mike

w4rdm

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Network Bandwidth Requirement for TS-480 and TS-2000?
« Reply #4 on: 2010-05-03, 07:45:22 »
I have a Cradlepoint PH300 router that I have been using with the usb stick.
The router also has a battery built in for portable use.

73,

Ron W4RDM
www.hexkit.com