Author Topic: TS-480 and router config  (Read 2431 times)

sm0mdg

  • Jr. Member
  • **
  • Posts: 36
    • View Profile
TS-480 and router config
« on: 2010-05-10, 01:13:51 »
I am having big troubles connecting to my remote station, a TS-480. Everything works when connecting via the local Lan, but I am not able to get a connections from the outside. I have added port forwarding for the suggested ports including change of SIP port # to 5061. I have a D-Link DSL-2640B at the station site and a Netgear DG834PN between my remote head and the internet.

When I try to connect (using power button) the yellow led on the Remoterig interface lights steady, and sometimes the display lights up, but most if the times noting at all happens except for a weak clicking noise from the speaker. When the display lights up there is no audio received, but there seems to be outgoing audio as the power and ALC meters moves when I try to transmit. It seems not possible to control the radio, only Power on/off is functional

Any ideas? Anyone using the routers I mentioned and have specific ideas?

Status at Radio end:

Name   Value
Radio   ON
SIP status   Connected/transfering
Last SIP error   None
RTP Timeout   59
SIP Timeout   0
Rx Jitter buffer size   4
Rx Jitter delay   3
SIP Out port   5061
SIP In port   5061
Audio Out port   11020
Audio In port   11000
Command Out port   12000
Command In port   12000
External SIP In port   5061
External Audio In port   11000
External Cmd In port   12000
Other party   ---removed---
Input 1   High
Input 2   High
Output 0   Low
Output 1   Low
Output 2   Low

Status at control end:

Name   Value
Control panel   ON
Radio   ON
SIP status   Connected/transfering
Last SIP error   None
RTP Timeout   60
SIP Timeout   0
Rx Jitter buffer size   4
Rx Jitter delay   3
SIP Out port   5061
SIP In port   5061
Audio Out port   11000
Audio In port   11000
Command Out port   12000
Command In port   12000
External SIP In port   5061
External Audio In port   11000
External Cmd In port   12000
Other party   ---removed---
Input 0   High
Input 1   High
Input 2   High
Output 0   High
Output 1   Low
Output 2   Low

73 de Björn,
SM0MDG
SE0X
« Last Edit: 2010-05-10, 09:38:51 by sm0mdg »

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 2563
    • View Profile
    • sm2oan
    • Email
Re: TS-480 and router config
« Reply #1 on: 2010-05-10, 12:27:23 »
Hi

Be sure that SIP ALG is NOT activated in the Netgear Box. If the other one has something like that switch it off

73 de mike

sm0mdg

  • Jr. Member
  • **
  • Posts: 36
    • View Profile
Re: TS-480 and router config
« Reply #2 on: 2010-05-10, 18:08:24 »
SIP ALG has been switched off on both routers.

73 de Björn,
SM0MDG
SE0X

sm0mdg

  • Jr. Member
  • **
  • Posts: 36
    • View Profile
Re: TS-480 and router config
« Reply #3 on: 2010-05-19, 22:32:53 »
This problem has been resolved.

It was not caused by the D-Link router, it was probably the effect of another part of the link messing up the ports. With the mentioned normal port forwarding settings for SIP, control and audio ports the router works fine for Remoterig. It is not necessary to place the Remoterig interface in the DMZ zone as suggested, just use port forwarding.

73 de Björn,
SM0MDG
SE0X