Author Topic: 2nd RR + Kenwood D710  (Read 3417 times)

M1EMB

  • Jr. Member
  • **
  • Posts: 42
    • View Profile
    • Email
2nd RR + Kenwood D710
« on: 2014-03-01, 03:41:37 »
Hello All

Wanted to put this out there and see if anyone had any issues with the following setup, I currently run a RR with an Icom 7100 but wanted to add a Kenwood D710 to my Remote Shack too so I will be purchasing a 2nd set of 1258's to run a d710.    Has anyone here run a d710 and had good results?  Does it still have dual receive and would a 2nd RR be any issue at all?

Thank you

Stuart

M1EMB

  • Jr. Member
  • **
  • Posts: 42
    • View Profile
    • Email
Re: 2nd RR + Kenwood D710
« Reply #1 on: 2014-03-05, 23:58:42 »
Anyone help me with this please?

Thank you

Stuart

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3004
    • View Profile
    • sm2oan
    • Email
Re: 2nd RR + Kenwood D710
« Reply #2 on: 2014-03-06, 07:40:52 »
Strange, Im sure I have answered you, must have missed the post button. There is no issue with a second set of RRCs if you have enough bandwidth, but you must use a new set of port numbers and setup portforwarding for them. I think you can decide in the TM-D710 if you want both RXs in same speaker or if you want them in separate, both alternative can be handled by the RRC. I have used TM-D710 remote my self, The main functionality is perfect but there is a few limitations, the buttons on the mic do not work, and there is probably some limitations with the APRS functions as the modem is located in the frontpanel. If you need those functions the IC-2820 might be a better choice as it is fully supported.

73 de mike