Author Topic: Multiple RRC Radio Sites  (Read 1361 times)

G8TLQ

  • Newbie
  • *
  • Posts: 9
    • View Profile
    • Email
Multiple RRC Radio Sites
« on: 2014-04-14, 16:40:25 »
Anyone out there know if there is a simple and quick way to switch my RRC Control unit from one RRC Radio site to another ?

I currently have 2 x remote RRC Radio units, each with a Yaesu FT8900 connected. Both have unique IP addresses.

I have 1 x RRC Control unit, with profiles for each of the RRC Radios.

I usually switch the profiles in the config settings, and then reset the unit.

Is there a quicker way to do this using e.g. hardware switch ? ... rather than having to change the config each time ?

dj0qn

  • Hero Member
  • *****
  • Posts: 1990
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Multiple RRC Radio Sites
« Reply #1 on: 2014-04-14, 16:44:34 »
If you look at the control RRC's menu, you will see one called "profiles". This gives you up to five
different configurations that you can use to access for example several different sites. Of course,
this doesn't change your hardware configuration, so you are for the most part stuck with one type
of radio using this method.

73,
Mitch DJ0QN / K7DX

G8TLQ

  • Newbie
  • *
  • Posts: 9
    • View Profile
    • Email
Re: Multiple RRC Radio Sites
« Reply #2 on: 2014-04-14, 16:56:05 »
Thanks.