Author Topic: Antenna switch over IP  (Read 4152 times)

LA7THA

  • Jr. Member
  • **
  • Posts: 75
    • View Profile
Antenna switch over IP
« on: 2014-12-04, 23:12:34 »
Hi All
I just received my antenna switch 1269 and have configured it to "talk “on my network.
I can manually switch antenna and seems to do that just fine. I have tried to use the IP function between the RRC Radio and antenna switch. Settings in antenna switch are:

Antenna switch configured with IP address as in Radio RCC (192.168.1.120)
Ports are the same in RRC and antenna switch 13010. I have not been able to get the antenna switch to follow the Radio/Radio RRC.

I have also used Micro RRC and TRX-Manager to see if RS232 port is working and that work just find. Suggestions are welcome.
Using the latest software in RRC Radio and antenna switch.

Seems that info gets updated in RRC Radio see Copy and paste from Radio RRC below.

Antenna -Switch (IP) 192.168.1.70/13010

73 Rune LA7THA
« Last Edit: 2014-12-04, 23:25:55 by LA7THA »

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3004
    • View Profile
    • sm2oan
    • Email
Re: Antenna switch over IP
« Reply #1 on: 2014-12-05, 08:07:16 »
Have you selected the correct radio protocol ? You don't say what radio you use.
I guess you have done the switching setup and changed to auto on the main page.

73 de mike

LA7THA

  • Jr. Member
  • **
  • Posts: 75
    • View Profile
Re: Antenna switch over IP
« Reply #2 on: 2014-12-05, 12:36:39 »
Hi Mike

I am using KW480 and i try different settings. When select Kenwood IF the radio goes dead stop working.
Also the auto selection on main page is done.

I can send you log in page and username and password in an email.

73 Rune LA7THA

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3004
    • View Profile
    • sm2oan
    • Email
Re: Antenna switch over IP
« Reply #3 on: 2014-12-05, 12:39:44 »
What is a KW480 ? we may not support that

/mike

LA7THA

  • Jr. Member
  • **
  • Posts: 75
    • View Profile
Re: Antenna switch over IP
« Reply #4 on: 2014-12-05, 12:40:29 »
Kenwood TS480 ;)

LA7THA

  • Jr. Member
  • **
  • Posts: 75
    • View Profile
Re: Antenna switch over IP
« Reply #5 on: 2014-12-07, 07:11:05 »
Problem solved, the IP function is not implemented in Version 1 of the RRC boxes (Silver type)

73 Rune LA7THA

************************************************************************
10th JAN.2015
I have a new RRC MKIIS now on remote (RADIO RRC) and my antenna switch is working verry nice :-)

73 Rune LA7THA
************************************************************************
« Last Edit: 2015-01-10, 10:19:10 by LA7THA »