RRC 1258 Support på Svenska > Hårdvara, Kablage, Installationer
Electret mic and K3 and one way audio
(1/1)
Bob G3PJT:
Hi
Been having a one way audio problem. My Icom SM20 works very well with my K3. But would not work with the RR Control unit set for the Elecraft hardware settings. After a lot of hunting we found that the mic did not produce any output when plugged into the Control. What seems to be happening is that although the mic is biased the AF is filtered out.
Anybody seen the same effect ?
Thanks for any comments
73 Bob G3PJT
sm2o:
Hi
ICOM SM20 is not wired like most of the Icom mics, It need power for the mic element on a separate pin. The RRC power the mic on the mic wire "phantom feeding".
http://qrzcq.com/pub/RADIO_MANUALS/ICOM/ICOM--IC-SM-20-Microphone-schematics.pdf
73 de mike
Navigation
[0] Message Index
Go to full version