Author Topic: Com issue RRC Micro  (Read 5997 times)

LA7THA

  • Jr. Member
  • **
  • Posts: 75
    • View Profile
Com issue RRC Micro
« on: 2014-12-18, 23:56:55 »
Hi All,
Hi have tried to sort out a com issue with RRC Micro version, xxxx.13, xxxx.14 and the latest xxxx.15.
If I use RRC Micro version 1.6.12.0 BETA2 all is working as normal. I just start the RRC Micro client software and all is working fine. I can start and stop, exit TRX-Manager start again and all is as normal.

If I use RRC Micro version 1.6.13.0, xxxx14 or xxxx15 I can always start the RRC Micro then connect using TRX-manger. I can open the cat port and close it all day long and it work. If I EXIT TRX-Manger and start TRX-Manager again and try to connect with Cat, I can send the command but the radio will not update any i.e. frequency etc. Sometimes I get and errors say “port already open”. If I Exit TRX-Manager, EXIT RRC Micro, rebooting the PC and start again I can always connect the first time but as soon as I have EXIT TRX-Manager ones the problem comes back.
Is this related to my PC? If I uninstall and install RRC Micro client 1.6.12.0 BETA2 all is back to normal again. I will leave this to the experts I have spent 10-15 hours and this is my final result. Is there anyone that is using RRC Micro with similar problem?
I am uisng W7 64bit and latest firmware in RRC Radio.

73 Rune LA7THA

roland

  • Guest
Re: Com issue RRC Micro
« Reply #1 on: 2014-12-19, 08:32:12 »
Could you send a problem report as shown here
http://www.remoterig.com/wp/?page_id=93 


LA7THA

  • Jr. Member
  • **
  • Posts: 75
    • View Profile
Re: Com issue RRC Micro
« Reply #2 on: 2014-12-19, 13:36:57 »
Hi

Debug log sent for RRC Micro ver 1.6.1.15.0 and 1.6.12.BETA2

73 Rune LA7THA


roland

  • Guest
Re: Com issue RRC Micro
« Reply #3 on: 2014-12-19, 13:54:16 »
Yes. I got it ... Thanks a lot  ;D

IZ7ANL

  • Jr. Member
  • **
  • Posts: 50
    • View Profile
    • Email
Re: Com issue RRC Micro
« Reply #4 on: 2014-12-29, 17:25:48 »
Roland,
I'd the same problem and I decise to use ver. 12 it's more stable
My setup TS480 Radio Control Program for 480
My best wishes for 2015
73 Nick

roland

  • Guest
Re: Com issue RRC Micro
« Reply #5 on: 2014-12-29, 17:30:38 »
Thank's for the information.
We will investigate after the New Year weekends are over.

Best wishes to you also guys
 

roland

  • Guest
Re: Com issue RRC Micro
« Reply #6 on: 2015-01-07, 11:00:19 »
I found a problem with the sound in 1.6.14-1.6.15
Please install the update 1.6.16 and check if this fixes your problems

http://www.remoterig.com/forum/index.php?topic=3196.0