Author Topic: PC-Client setup  (Read 3539 times)

ea3in

  • Jr. Member
  • **
  • Posts: 79
    • View Profile
    • Email
PC-Client setup
« on: 2010-07-23, 10:25:44 »
Hello

I'm not able to put my PC Client in working order.

Probably I don't understand its behaviour yet

Software is installed without errors in one of my laptops (except that Location doesn't show microbit)

I have only set up the SIP part, because I plan to use it only for audio and PTT.

FIRST QUESTION: Is it mandatory to have a COM setup in order to establish a SIP link?

SECOND: My radio is a TS-480. Is it mandatory to use it via the serial port? So is it mandatory to have 2 connections: one serial ant the other with standard cable I use when using the remote RRC?

I will come with more questions. Sure

Thanks in advance




sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3004
    • View Profile
    • sm2oan
    • Email
Re: PC-Client setup
« Reply #1 on: 2010-07-23, 11:11:57 »
Hi

Yes you have to setup a serial port also. You do not need to use it, but if there is no data traffic the connection will be disconnected after about 5 min.

If you want to control the TS-480 from HamRadioDeLuxe(HRD) via the MicroRRC you must use the RS232 port on the TS-480. HRD can not handle the control panel protocol.

73 de mike

ea3in

  • Jr. Member
  • **
  • Posts: 79
    • View Profile
    • Email
Re: PC-Client setup
« Reply #2 on: 2010-07-23, 21:48:32 »
Now working on this laptop

Thanks