Author Topic: TS-2000/RC-2000 Meter selection  (Read 1511 times)

WA6ZTY

  • Newbie
  • *
  • Posts: 6
    • View Profile
TS-2000/RC-2000 Meter selection
« on: 2015-01-06, 02:17:39 »
Has anyone been able to switch the RC-2000 meter from Pwr to ALC or SWR via the RC-2000 and RemoteRig?  The instructions I received from Leo at Kenwood said to;

1.) Turn PROC to ON (C1 menu).
2.) Hold METER (B4 menu) down while pressing PTT.

This is said to cycle the meter function between Pwr, ALC, and SWR, but it isn't working for me.  Perhaps the sequence is not propagating thru the RemoteRig interface (or I'm just doing it wrong).

Since the radio is at the remote site, I'm unable to view the meter on the radio to see if it is changing, but I do know that the meter on the RC-2000 remains on Pwr.

-Mike-\
WA6ZTY

oh6eec

  • Newbie
  • *
  • Posts: 8
    • View Profile
    • Email
Re: TS-2000/RC-2000 Meter selection
« Reply #1 on: 2015-01-08, 10:16:36 »
It is working ok for me.

Press mic PTT down and hold meter button down for while. Start pressing meter button and you should see alc, comp, swr, pwr functions on the screen.

Hope this helps  8)

WA6ZTY

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: TS-2000/RC-2000 Meter selection
« Reply #2 on: 2015-01-13, 07:19:04 »
Thank you Juho!

It seems that your technique, to hold PTT down then press METER instead of holding METER while pressing PTT, is the correct one.  I'll pass that along to Leo at Kenwood.

-Mike-
WA6ZTY