Author Topic: Router config  (Read 4749 times)

ve2jtx

  • Newbie
  • *
  • Posts: 5
    • View Profile
    • Email
Router config
« on: 2015-01-08, 21:04:55 »
Do you need port forwarding?(router) on both site?

dj0qn

  • Hero Member
  • *****
  • Posts: 2006
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Router config
« Reply #1 on: 2015-01-08, 21:43:17 »
Only on the radio side (usually).

73,
Mitch DJ0QN / K7DX

ve2jtx

  • Newbie
  • *
  • Posts: 5
    • View Profile
    • Email
Re: Router config
« Reply #2 on: 2015-01-08, 22:13:38 »
THANK YOU 73'S

ve2jtx

  • Newbie
  • *
  • Posts: 5
    • View Profile
    • Email
Re: Router config
« Reply #3 on: 2015-01-09, 13:36:48 »
mY HEAD SEND ALWAYS 3 TONE .... NO CONNECTION .? WHAT PORT I NEED TO FOWARD

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 2544
    • View Profile
    • sm2oan
    • Email
Re: Router config
« Reply #4 on: 2015-01-09, 13:52:32 »
Hi
As the manual says, You need to forward port 80,13000,13001,13002
/mike

ve2jtx

  • Newbie
  • *
  • Posts: 5
    • View Profile
    • Email
Re: Router config
« Reply #5 on: 2015-01-09, 14:37:13 »
i foward this 3 ports, i read port sip 5060 ?

dj0qn

  • Hero Member
  • *****
  • Posts: 2006
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Router config
« Reply #6 on: 2015-01-09, 15:47:12 »
Drop me a short mail to dj0qn  (at) darc.de and I will send you my networking checklist that walks you through the installation process.

73,
Mitch DJ0QN / K7DX

ve2jtx

  • Newbie
  • *
  • Posts: 5
    • View Profile
    • Email
Re: Router config
« Reply #7 on: 2015-01-11, 22:54:22 »
All works !

W5RF

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Router config
« Reply #8 on: 2015-03-18, 10:26:55 »
Mitch - could you drop me the same quick setup sheet? thanks and 73s.. bob W5RF

dj0qn

  • Hero Member
  • *****
  • Posts: 2006
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Router config
« Reply #9 on: 2015-03-18, 10:36:31 »
Sure, Bob, but I need your email address. Drop me a short mail at dj0qn ( at ) darc.de and I will send it to you.

73,
Mitch DJ0QN / K7DX

W5RF

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Router config
« Reply #10 on: 2015-03-20, 01:37:10 »
thanks! :)

VK6EI

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Router config
« Reply #11 on: 2015-09-16, 17:28:53 »
Hi Mitch, I know it is an old thread but any chance getting a copy of you config help as well.

vk6ei (at) bigpond (dot) com

removing the obvious :-)

Thanks

Tim, VK6ei

I wish there was a beginners dummy guide, just bought the Micro PC setup but I admit it is beatin me so far..


dj0qn

  • Hero Member
  • *****
  • Posts: 2006
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Router config
« Reply #12 on: 2015-09-16, 17:33:13 »
Done!

73,
Mitch DJ0QN / K7DX