Author Topic: I'd like RRC-Micro PC-Client but...  (Read 6838 times)

hb9edm

  • Jr. Member
  • **
  • Posts: 39
    • View Profile
I'd like RRC-Micro PC-Client but...
« on: 2010-07-29, 23:06:03 »
...How can I use it if I have both com port already in use?

I have the mkII version and the ts-480.
The com 1 is used for the amplifier and the com 2 is used for the rotator control.

I'm very interested on the rrc-micro but I don't want to sacrifice the amplifier or the rotator, any idea to solve this problem?


Best 73

HB9EDM
HB9EDM

Remote setup:
TS480 - Expert 1K - ERC rotator - Heil

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3004
    • View Profile
    • sm2oan
    • Email
Re: I'd like RRC-Micro PC-Client but...
« Reply #1 on: 2010-07-31, 23:28:31 »
Hi
there is only 3 serial ports in the RRC so there is not so much to do. On the other hand there are lot of equipment avaliable for remote serialports for example Tibbo DS203.

73 de mike


ON4AOI

  • Sr. Member
  • ****
  • Posts: 295
    • View Profile
    • Email
Re: I'd like RRC-Micro PC-Client but...
« Reply #2 on: 2010-08-09, 19:31:11 »
Donīt see your problem HB9EDM

Guy ON4AOI

hb9edm

  • Jr. Member
  • **
  • Posts: 39
    • View Profile
Re: I'd like RRC-Micro PC-Client but...
« Reply #3 on: 2010-08-10, 13:44:43 »
Hi Guy,

I don't understand your reply.
Now, with my setup, I can't use the rrc-micro client because my radio is not connected with cat on the remoterig so.... NO pc-client for my shack.
HB9EDM

Remote setup:
TS480 - Expert 1K - ERC rotator - Heil

ON4AOI

  • Sr. Member
  • ****
  • Posts: 295
    • View Profile
    • Email
Re: I'd like RRC-Micro PC-Client but...
« Reply #4 on: 2010-08-11, 07:09:10 »
I didnt understand why you were talking about only  2 comports
since the MKII as 3 ports (2 real and one via ttl to rs232) and the pc-client
has 3 virtual ports , but without CAT connection it want work

Guy ON4AOI

hb9edm

  • Jr. Member
  • **
  • Posts: 39
    • View Profile
Re: I'd like RRC-Micro PC-Client but...
« Reply #5 on: 2010-08-11, 08:01:33 »
TTL for the display
COM1 for the amplifier
COM2 for the rotator control

no more ports available, no CAT so no PC-client connection possible.

Best 73

hb9edm

HB9EDM

Remote setup:
TS480 - Expert 1K - ERC rotator - Heil

ON4AOI

  • Sr. Member
  • ****
  • Posts: 295
    • View Profile
    • Email
Re: I'd like RRC-Micro PC-Client but...
« Reply #6 on: 2010-08-11, 13:01:25 »
Hi again,
in my opinion the CAT can work
Example (I know it can be easier done)
setup with PC-client
on LOCAL PC you run ARCP-480, CAT is setup to the first virtual port = com0
on LOCAL PC you run PstRotatorAz, rotator is setup to the second virtual port = com1
on LOCAL PC you run Expert-1K software and is setup to the third virtual port = com2   

on REMOTE Side RRC-1258 MKII ttl port goes to the ts480 ttl port
on REMOTE Side RRC-1258 MKII com1 goes to the rotator control
on REMOTE Side RRC-1258 MKII com2 goes to the expert-1K comport
on REMOTE Side you connect pin3(tx) and pin 5(Gnd) of the TS-480 comport (on front) to pin1 (RS232-RX) and gnd to pin4(gnd) of the expert DB15 (also connect alc and ptt from 8P minidin to this connector, The expert will auto follow the radio.

Guy ON4AOI




hb9edm

  • Jr. Member
  • **
  • Posts: 39
    • View Profile
Re: I'd like RRC-Micro PC-Client but...
« Reply #7 on: 2010-08-11, 22:51:41 »
Hi Guy!

thks for the info!



best 73
HB9EDM

Remote setup:
TS480 - Expert 1K - ERC rotator - Heil