dns

[ea1gwm]

Hola:

Llevo un par de semanas con mis rcc-1258 MKII conectados al kenwood 480 y todo perfecto dentro de mi propia red.
El problema lo tengo cuando quiero conectarme por dns ( internet ) que no lo doy conseguido. En la rrc-radio ( 228) tengo el servidor dns de remoterig que me dio, el cual pongo en la rrc-control (227) en radio settings  y dentro de este en sip contact.
No se cual es el fallo.

Muchas gracias.


Hi:

I have a couple of weeks with my RCC-1258 MKII 480 connected to Kenwood and perfect within my own network.
The problem I have when I want to connect to dns (internet) that I failed. In the ITC-radius (228) I have the dns server remoterig he gave me, which I put in the ITC-controller (227) in radio settings within this SIP contact.
Which is not the failure.

Thank you very much.

[dj0qn]

You need to use the xternal IP number (or dynamic DNS address) of the radio RRC in the
SIP contact field and forward the correct ports in the radio RRC's router.

If your English is OK, I can send you my networking checklist that explains how to do this.
Drop me a short mail at dj0qn (at) darc.de and I will send it to you.

73,
Mitch DJ0QN / K7DX

[ea1gwm]

Thank you very much for responding so quickly.
Now it is working properly, the problem is that the ports were not 12000/11000 ... in my case are 13000/13001/13002.