Author Topic: Using remote rig with UHF or VHF  (Read 1695 times)

g4gwc

  • Newbie
  • *
  • Posts: 1
    • View Profile
    • Email
Using remote rig with UHF or VHF
« on: 2015-06-01, 12:18:31 »
I would like to remote-rig my IC 7100 using a radio link instead of the internet or wifi
any ideas on how to proceed, a 2m or 70cms link with just enough bandwidth for full remote and voice.

Regards

Ron

G4GWC

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 2544
    • View Profile
    • sm2oan
    • Email
Re: Using remote rig with UHF or VHF
« Reply #1 on: 2015-06-01, 19:39:31 »
I have never heard of such links for 2m or 70 cm. 5 GHz links is cheap and reliable.

73 de micke

dj0qn

  • Hero Member
  • *****
  • Posts: 2006
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Using remote rig with UHF or VHF
« Reply #2 on: 2015-06-01, 20:19:09 »
I have done this using WiFi at 5 GHz using Ubiquity Bullets https://www.ubnt.com/airmax/bulletm/
which allow nearly 50 KM using high power Bullets attached to high-gain antennas. If a shorter
distance is required, a solution such as the Nanostation https://www.ubnt.com/airmax/nanostationm/ would be sufficient.

73,
Mitch DJ0QN / K7DX