Author Topic: K3 twin and Samsung S4  (Read 3922 times)

sm2sum

  • Jr. Member
  • **
  • Posts: 48
    • View Profile
    • Email
K3 twin and Samsung S4
« on: 2015-10-01, 15:14:16 »
Last update 1.3.0
It,s not possible to disconnect, you can not swap back to startside.
Only way is to restart the smartphone and the RRC and power off the K3.
K3 twin
Mobile internet
Dovado router

roland

  • Guest
Re: K3 twin and Samsung S4
« Reply #1 on: 2015-10-01, 16:02:36 »
Last RRC Nano Kenwood is 1.3.4.
Does the problem remain with that one?

And remember that you HAVE to uninstall RRC Nano S service also.
It collides with the new 1.3.4 and will be obsolete in all future versions.

Also. You must have the latest firmware 2.87 installed
« Last Edit: 2015-10-01, 16:20:42 by Roland (Microbit) »

sm2sum

  • Jr. Member
  • **
  • Posts: 48
    • View Profile
    • Email
Re: K3 twin and Samsung S4
« Reply #2 on: 2015-10-01, 22:00:46 »
Ok

I have latest firmware  and uninstalled RRC Nano S service

 but K3 twin is from Elecraft and 1.3.0 seems to be latest update....

and l having problem to disconnect because the button disappears after the connection
K3 twin
Mobile internet
Dovado router

roland

  • Guest
Re: K3 twin and Samsung S4
« Reply #3 on: 2015-10-01, 22:59:50 »
Sorry. My fault. Was thinking of the Kenwood app  ::) yes 1.3.0 is the latest. The app has 2 pages. You can go between them by the white left and right arrows up in the top red bar. When you connect the second (radio page) is made current. To get back to the connect page with the connect/disconnect button just use those arrows.

sm2sum

  • Jr. Member
  • **
  • Posts: 48
    • View Profile
    • Email
Re: K3 twin and Samsung S4
« Reply #4 on: 2015-10-02, 08:00:52 »
Fine
Missed the small arrows !
Works very good now

Thanks
K3 twin
Mobile internet
Dovado router

roland

  • Guest
Re: K3 twin and Samsung S4
« Reply #5 on: 2015-10-02, 08:17:29 »
Nice :)

sm2sum

  • Jr. Member
  • **
  • Posts: 48
    • View Profile
    • Email
Re: K3 twin and Samsung S4
« Reply #6 on: 2015-10-04, 21:06:18 »
Sorry to say but it worked only that day...
Now callsign is missing all the time
K3 twin
Mobile internet
Dovado router

roland

  • Guest
Re: K3 twin and Samsung S4
« Reply #7 on: 2015-10-05, 11:27:05 »
Sorry to say but it worked only that day...
Now callsign is missing all the time

Published Elecraft 1.3.1. Does it solve your problem?

sm2sum

  • Jr. Member
  • **
  • Posts: 48
    • View Profile
    • Email
Re: K3 twin and Samsung S4
« Reply #8 on: 2015-10-05, 15:47:28 »
No it does not... I have tried with nanos service also and without.
The diode is green all the  time it was red before connection earlier
My other unit Samsung  tab 4 does not work either...
K3 twin
Mobile internet
Dovado router

roland

  • Guest
Re: K3 twin and Samsung S4
« Reply #9 on: 2015-10-05, 16:03:18 »

So your call sign is not recognized with this version either.

Take note that the Nano Service (RRC Nano S) MUST BE UNINSTALLED when using Elecraft 1.3.0 and higher.
It collides with the new Elecraft App and nothing will work as excpected.

The "green" diode now just shows that all internal and external connection is up and ready for service.
If its red something is wrong.

I would be interested in checking from my end.
If that's ok send me a PM with your settings Callsign, Contact etc..


« Last Edit: 2015-10-05, 16:20:18 by Roland (Microbit) »