Author Topic: UDP cmd status error on control RRC  (Read 1764 times)

guanaco

  • Newbie
  • *
  • Posts: 27
    • View Profile
UDP cmd status error on control RRC
« on: 2015-10-04, 14:01:21 »
Hi,

I'm not able to use my remote setup anymore. I hear some popping sound on the radio side, but the screen doesn't work.
Status on the control RRC is:
Control panel   ON
Radio   ON
Connection status   Faulty(See below)
SIP status   Connected/transfering
Last SIP error   None
RTP status   Excellent(60)
UDP cmd status   Error(0)
SIP command timeout   0
Rx Jitter buffer size   4
Rx Jitter delay   3
Dual Rx   0
Current audio packet size   20
...
DNS status OK

on the Radio RRC status looks ok:
Radio   ON
Connection status   OK
SIP status   Connected/transfering
Last SIP error   None
RTP status   Excellent(60)
UDP cmd status   OK(45)
SIP command timeout   0
Rx Jitter buffer size   7
Rx Jitter delay   6
Dual Rx   0
Current audio packet size   20

Since I only see some error message on the control part, I guess this side is somewhat suspicious.
I'm using a TS480.

what does "UDP cmd status   Error(0)" on the control side actually mean?
It seems connection is ok, except for the UDP cmd?!? part.

Please help

Thanks!
Johan.

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 2561
    • View Profile
    • sm2oan
    • Email
Re: UDP cmd status error on control RRC
« Reply #1 on: 2015-10-05, 09:09:14 »
Something between the RRCs is blocking the cmd port, try to restart the routers in both ends

73 de mike

guanaco

  • Newbie
  • *
  • Posts: 27
    • View Profile
Re: UDP cmd status error on control RRC
« Reply #2 on: 2015-10-09, 19:10:51 »
it's really strange.. It worked ok for the first year or so, but now I always need to restart my remote router 1 time!
maybe time to replace the router..