Author Topic: Random reboots with firmware 2.87  (Read 3801 times)

Erik Finskas OH2LAK

  • Newbie
  • *
  • Posts: 9
    • View Profile
    • Email
Random reboots with firmware 2.87
« on: 2015-11-11, 21:54:23 »
I upgraded by K3 and IC-7100 RRC's to the new version recently and the control end experiences now of random reboots. Nothing special gets to the debug terminal and the only thing through which I realise the reboot is the IP-address CWID. The connection does not go down with this so maybe reboot is not a good definition. Also real reboots with unit killing the connection, shutting down and booting up happen quite often.

Once I was able to catch the network address details getting printed to the terminal output at the same time with the IP-address CWID but can't yet say is it related.

I will downgrade to see does this behavior go away.

73
.-.-.
Erik OH2LAK

Erik Finskas OH2LAK

  • Newbie
  • *
  • Posts: 9
    • View Profile
    • Email
Re: Random reboots with firmware 2.87
« Reply #1 on: 2015-11-11, 22:26:41 »
Interresting detail.

Downgraded to 2.86 and had the IC-7100 connection up for a while.

The IP-address CWID repeats exactly every 2 minutes. Next test is with the IP-address CWID switched off.

73
.-.-.
Erik OH2LAK

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3008
    • View Profile
    • sm2oan
    • Email
Re: Random reboots with firmware 2.87
« Reply #2 on: 2015-11-11, 23:11:35 »
Have you activated ping watchdog by misstake, thats the only settings which can give reset exactly after the same time

/mike

Erik Finskas OH2LAK

  • Newbie
  • *
  • Posts: 9
    • View Profile
    • Email
Re: Random reboots with firmware 2.87
« Reply #3 on: 2015-11-12, 07:33:47 »
That was my first thought also but looks like the watchdog function is not even possible for the control end.

I will make a factory reset for the unit