Author Topic: firmware 2.21 - unstable?  (Read 7554 times)

Edger

  • Newbie
  • *
  • Posts: 18
    • View Profile
Re: firmware 2.21 - unstable?
« Reply #15 on: 2010-10-22, 19:33:24 »
I'm using auto for all sets. I miss an over problem, if i use the ptt switch for long time (15s) the trx stay often on tx. I need to push again the ptt to go back to rx...
The problem is the same with 2.25 so I'll return to 2.15.
If it's possible I would like to have 2.10 again to download.

73''

Jan (Microbit)

  • Software Developer
  • Administrator
  • Hero Member
  • *****
  • Posts: 1796
    • View Profile
    • Email
Re: firmware 2.21 - unstable?
« Reply #16 on: 2010-10-22, 20:35:59 »
I'm using auto for all sets. I miss an over problem, if i use the ptt switch for long time (15s) the trx stay often on tx. I need to push again the ptt to go back to rx...
The problem is the same with 2.25 so I'll return to 2.15.
If it's possible I would like to have 2.10 again to download.

73''
You are using "Auto" and still have network related problems? Which speed does the switches/hubs/routers you have the RRCs connected to? 10 Mbit, 100 Mbit or even faster?
Always include type of hard/software and version when asking for support.

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 2555
    • View Profile
    • sm2oan
    • Email
Re: firmware 2.21 - unstable?
« Reply #17 on: 2010-10-22, 20:36:42 »
Hi

I have put back 2.10 on the firmware page. I have also tested to back from 2.25 and it's no problem.

So let's see what's happen if you back

73 de mike

Edger

  • Newbie
  • *
  • Posts: 18
    • View Profile
Re: firmware 2.21 - unstable?
« Reply #18 on: 2010-10-24, 18:47:59 »
Thank you  :)
Now i'm back with 2.10 :
- no more ptt blocked,
- I still have sip connection loose but now it's very short (less than 0.5 second, before it was 1-2 second), and not so often.
73''