Webswitch 1216H Support in English > Configuration, Webswitch 1216H

RC1216H and Expert 1K-FA

<< < (2/2)

Same Problem here, Firmware Vers. 4.24 and no reasonable indications on the web interface with chrome and edge. Using the RC1216H as a terminal server via port 3001 and the k1fa-command software works fine, so the rs232-cable must be ok and no usb-cable in use. You can use the power switches, but the amp seems not to start. Checking the status with the k1fa-software shows it up and running. Very strange!

73 de Mark, HB9AZT

The 1216H needed a hardware reboot, after cutting 12V, waiting a few seconds and rebooting the unit, it worked okay. Soft reboot via Software "restart device" was not sufficient.

73 de Markus, HB9AZT


[0] Message Index

[*] Previous page

Go to full version