Author Topic: K3 remote won't power up  (Read 3524 times)

n0ac

  • Newbie
  • *
  • Posts: 4
    • View Profile
    • Email
K3 remote won't power up
« on: 2016-01-19, 19:58:20 »
I'm just getting started with K3 to K3. When I turn on the control rig the remote doesn't power up. Should it? If the remote rig is powered up I can shut it down by powering down the control rig. If it can be powered up from the control rig where should I look to enable this function.

Bill, N0AC

dj0qn

  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: K3 remote won't power up
« Reply #1 on: 2016-01-19, 22:31:26 »
Bill,

It can not be powered up using a CAT command. There is a cable in the kit available from Elecraft or Microbit
that plugs in between the RRC's rear I/O port and the K3's ACC port that allows you to turn on the K3.

73,
Mitch DJ0QN / K7DX