Author Topic: Issues Connecting to the Remote site  (Read 998 times)

Serge_VA3SB

  • Jr. Member
  • **
  • Posts: 88
    • View Profile
    • Email
Issues Connecting to the Remote site
« on: 2016-06-10, 16:48:58 »
Hello to the group.
I've encountered an interesting but frustrating problem.
I am using Software version 2.91 on both Control and Radio units. I have also installed the Beta version of RRC Micro to enable me to send cw via paddles.My radio is a TS-480.

The issue is that when I try to connect to the remote site I keep getting the following error messages under RTP/UDP audio status and UDP CMD status:
 
Status

Name   Value
P5.4   ON
Radio   ON
Connection status   Faulty(See below)
SIP status   Connected/transfering
Last SIP error   None
RTP/UDP audio status   Stalled(23)
UDP cmd status   Error(0)

SIP command timeout   0
Rx Jitter buffer size   6
Rx Jitter delay   4
Dual Rx   0
Current audio packet size   20
Current audio quality   2 - Linear 16 bits 8 kHz
SIP Out port   13000
SIP In port   13000
Audio Out port   13001
Audio In port   13001
Command Out port   13002
Command In port   13002
External SIP In port   13000
External Audio In port   13001
External Cmd In port   13002

Anyone have any idea what could be causing this. It is intermittent as sometimes I am able to connect with both the Control RRC and RRC Micro.
Please let me know if I need to add any additional information to help trouble shoot this problem.

Any assistance/guidance would be appreciated.

Thank you in advance.

73

Serge
VA3SB