RRC-Micro PC Client in English > General discussion

TS-480 control head beeps but won't power up radio

<< < (2/2)

OH6XE:
I have now samekind of problem. Setup works when I tested it at home. control (ip 192.168.0.127) on cablemodem router and radio (192.168.0.128) on mobile router.
Now I am in remote place and try to test my setup with mobile router(3G IP is 80.x.x.x)  but radio dont start on. Both,  radio and control RCCs are in same router
DDNS status is ok both RCCs. In radio RCC external ip is same as 3G ip
How do I test RCCs only connect them to ethernet switch

dj0qn:
If you drop me a short mail at dj0qn (at) darc.de I can send you my networking checklist that should
help you out.

If within the same network, using the radio's internal IP number as the SIP contact will connect them
together. In your case, I assume that you made a mistake, since both have 192.168.0.127.

Also, note that using a 3G/4G router on the radio side will not work unless you get a true IPv4 external
IP address from your provider. By default, you are given an internal IP number that can't be routed. the
Nordic providers seem to be best if giving you a true IP number when you ask, so you may be in luck.

Anyway, I can send you my checklist if you want.

73,
Mitch DJ0QN / K7DX

Navigation

[0] Message Index

[*] Previous page